JVC HR-S7600U manual VCR Plus+ Timer Programming, Timer Recording, Enter Pluscode Number

TIMERRECORDING

EN45

VCR Plus+

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

− +

	1	2	3
				2
	4	5	6	NUMBER
	7	8	9
CANCEL		0		4
PROG.	1

OK

TIME SCAN

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. (☞ pg. 45 or 49)

The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCode programming numbers are the numbers next to the program in most TV listing.)

1	LOAD A CASSETTE
	Make sure the record safety tab is present.
	● The VCR’s power comes on automatically.
2	ACCESS VCR PLUS+ SCREEN
	Press PROG. on the		VCR PLUS+
	remote control.
	● The clock must be set in
	order to access the VCR
	Plus+ screen. If you
		PRESS NUMBER KEY (0–9)
	haven’t set the clock, the
		PRESS (+/–) TO SET
	Main Menu screen		EXPRESS PROGRAMMING
	appears after an error	PRESS (PROG.) TO END
	message is displayed.
	Refer to page 8 for the Plug & Play procedure or page
	11 for the clock setting procedure.
3	ENTER PLUSCODE NUMBER
	Press the appropriate		VCR PLUS+
	NUMBER keys to enter the
	PlusCode number printed		123
	in the TV listings for the
	TV program you wish to
	record and press OK.
		PRESS NUMBER KEY (0–9)
	If the Guide Channel Set
	screen appears, go to step 4.				THEN (OK)
		PRESS (PROG.) TO END
	If the VCR Plus+ program
	screen appears, go to step 5.
	● To make corrections, press CANCEL and input the
	correct PlusCode number.
	INPUT RECEIVING CHANNEL
4	NUMBER
	The Guide Channel		GUIDE CHANNEL SET
	Number, which is assigned
				GUIDE CH: 12
	to the TV or cable station
				VCR CH : –––
	for the PlusCode number
	that you entered in step 3,
	will appear automatically
		PRESS NUMBER KEY (0–9)
	on the Guide Channel Set
			OR (5,°), THEN (OK)
	screen. Input the number
		PRESS (PROG.) TO END
	of the channel on which
	the broadcast for the PlusCode number is received on
	the VCR or cable box using the NUMBER keys, CH 5°
	or TIME SCAN %Þ, then press OK.
	● The Guide Channel Set screen appears only when you
	input the PlusCode number of a station for which the
	Guide Channel number has not previously been set.
	● If you receive your channels with a cable box and if
	you have properly set your Controller, "CABLE CH"
	appears in place of "VCR CH". If not, refer to pages
	16 – 18.

HR-S7600U-EN45-64 45 99.4.28, 2:05 PM