JVC HR-S7600U manual Can the VCR indefinitely remain in the still mode?

Page 68

68EN

QUESTIONSANDANSWERS

PLAYBACK

Q. What happens if the end of the tape is reached during playback or search?

A. The tape is automatically rewound to the beginning.

Q. Can the VCR indefinitely remain in the still mode?

A.No. It stops automatically after 5 minutes to protect the heads.

Q.During search, still and frame-by-frame playback, the picture is intermittent. What’s the cause?

A.Picture loss occurs when these types of playback are attempted with a tape recorded in LP mode. Pressing PLAY to return to normal playback will restore the

RECORDING

Q. When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and resume points.

Q.Can the VCR indefinitely remain in the Record-Pause mode?

A.No. The VCR automatically goes to its Stop mode after 5 minutes to protect the heads. When paused during Instant Timer Recording (ITR), the VCR shuts off automatically after 5 minutes.

picture.

Q. When playing back programs that have been timer- recorded with consecutive times (such one program from 8:00 to 9:00 and another one from 9:00 to 10:00), the picture and sound become momentarily distorted at the point where the first program ends and the second program begins. Is this a malfunction?

A.No. This is normal.

Q. What happens if the tape runs out during recording?

A.The VCR automatically rewinds it to the beginning.

TIMER RECORDING

Q. REC and ä remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording in progress.

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

Q. Other than preventing further recording, what effect does removing the safety tab have?

A.It disables marking of index codes.

Q.Sometimes, during Index Search, the VCR can’t find the program I want to see. Why not?

A.There may be index codes too close together.

Q.During playback, on-screen operational indicators sometimes jitter. Why does this happen?

A.If the condition of the tape being played back is not good, jittering of the video (including on-screen indicators) may occur.

A.Yes, but while you are setting the timer you won't see the tape's or broadcast program's picture as it is replaced by the on-screen menu. The audio from the tape or broadcast program will be present during the setting of the timer.

HR-S7600U-EN65-76

68

99.4.28, 2:06 PM

Page 67 Page 69
Image 68
Page 67 Page 69
Contents HR-S7600U Dear Customer Do not place the VCRInstallation Antenna Installation InstructionsServicing Before YOU Install Your NEW VCRUSE Contents Connections Back of VCR Video CableRF Cable supplied Connect VCR to TVPlug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetInformation Language Access Clock SET ClockPreparation Scan #Select D.S.T. Mode SET Auto Clock to onSelect Host Channel Semi-AutoSelect Time Zone Return to Normal ScreenSET Time SET DateAccess Main Menu Screen Access Tuner SET ScreenTuner SETAccess Manual ChannelAdd Or Delete a Channel Time Scan #Cable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRAccess Cable BOX SET Turn on Cable BOXSelect Cable BOX Output ChannelAccess Cable BOX Brand SET Screen Initial SettingsEnter Cable BOX Brand MenuDBS receiver DBS Receiver ControlConnect DBS Receiver To VCR Access Initial SET Screen Access DBS Receiver SET ScreenTurn on DBS Receiver Set DBS Receiver Output Channel & DBS Receiver BrandAccess DBS Receiver SET DBS Receiver BrandSimple Playback Simple Recording Playback Features Activate FRAME-BYFrame Playback Still Picture/Frame-By- Frame PlaybackAccess Distant Code Engage Manual Tracking ModeAdjust Manual Tracking Start SearchAccess Function SET Screen Select Picture Control SET ModeLayback and Recording Features Picture ControlSelect The Soundtrack Video StabilizerStart Repeat Stop RepeatAccess Function SET ModeSuperimpose Select Superimpose SETAccess Main Menu Screen AV Compu Link PlaybackMake Connection ExampleAccess Skip Menu Select ModePerform Movie AdvanceCommercial Advance Commercial Advance works as followsSelect CA Playback SET Mode Return to Normal ScreenPress CH 5 or Time CA RECORD, then pressAudio signal during TimeScan Time ScanVariable-Speed Search/ Reverse Motion Playback Playback tape 1 2 3 4Skip Over Unwanted Sections Skip SearchSpeed Audio output Pro-SlowON/OFF as required Default setting is on TimeScan AudioTimescan AUDIO, then To set to on or OFFDigital R3 SET ModeDigital TBC/NR Active Video Calibration Video CalibrationStart Playback PlaybackRecording Recording Features VHS Super VHS, S-VHS ET and VHS Select S-VHS ET SET Mode Super VHS ETPress S-VHS ET. The button lights up PanelStereo And SAP Second Audio Program To Record SAP ProgramsTo move the on-screens audio levels by one VCR Plus+ Timer Programming Timer RecordingNumber Enter Pluscode NumberCheck Program Data Engage Timer ModeEN Timer Recording VCR Plus+ Setup VCR Plus+ Guide Channel MatchingInitial SET, then press OK or Time Scan #Access Guide Channel SET Screen Input Guide Channel NumberInput Receiving Channel Number Press CH5, Time ScanSET Channel Number Express Timer ProgrammingSET Program Date If you are using a DBS receiver Press SP/EP to set the tape speedUnless DBS Receiver SET is Set to OFF pg , Band indication TV or CatvCancel or Revise a Program RE-ENGAGE TimerCheck, Cancel And Revise ProgramsSelect Auto SP=EP Timer SET Mode Auto SP=EP TimerAuto Timer Or Time Scan %ÞInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press REC on the front panelBefore performing the following steps Engage Auto Satellite Prog REC ModeAutomatic Sat- ellite Program Recording Edit To Or From Another Edit From a Camcorder EditingEnable Remote Pause Function Return to Normal Screen Set your VCR to its record modeStart Player Start RecorderReset the Counter Insert EditingLocate END Point Locate Start PointEND Insert Editing Engage Insert EditingStart Editing SET RECORDER’S Input Mode Audio DubbingEngage Audio Dubbing Start DubbingSpeci AL Features EN TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeEN Special Features Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Operate Cable BOXDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverEnter DBS Receiver Brand Operate DBS ReceiverUnplug Vcrs Power SET Remote ControlPlug in Power Cord Turn VCR Power onMake sure the cassettes window is Troubleshooting ENCassette gets stuck partway Timer again RoubleshootingOther Problems When scanning channels, someWhat happens if the tape runs out during recording? Can the VCR indefinitely remain in the still mode?Can the VCR indefinitely remain in the Record-Pause mode? MBR Multi-Brand Remote Code Setting VCR Plus+ Timer ProgrammingIndex List Of TermsFront View Rear View Remote Control EN Index20C to 60C -4F to140F Video connectors in x 2, OUT xSpeci Fications HOW to Locate Your JVC Service Center Limited Warranty HR-S7600U
Top Page Image Contents