JVC HR-S7600U manual Plug & Play Setup, EN I Nitial Sett Ings, Auto Clock Set/Auto Tuner Set

Page 8

8ENINITIALSETTINGS

Plug & Play

Auto Clock Set/Auto Tuner Set

The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function.

The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the “Host Channel” and it is a PBS channel in your area.

ATTENTION

If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. (☞ pg.11 – 15)

−

+

IMPORTANT

●Don’t press any buttons on the VCR or remote while Plug & Play is in progress.

●If you perform Plug & Play successfully, there’s no need to perform the Clock (☞ pg. 11) and Tuner (☞ pg. 14) procedures. If, however, you want to add or delete channels, refer to “Add Or Delete A Channel” on page 15.

1

PLUG & PLAY SETUP

Connect the antenna cable to the VCR (☞ pg. 6). Then connect the VCR’s power plug to an AC outlet. Do not power on the VCR. The clock and tuner channels will be set automatically.

NOTES:

●Auto clock set is performed first. The auto clock set function scans all the channels received by your VCR to find the Host Channel and then sets the clock. "Auto" blinks on the front display panel during Auto clock set.

●Auto channel set is performed next. The auto channel set function scans all the channels that are receivable by your VCR. It then automatically assigns each receivable channels to the CH5° (+/–) buttons. It skips non-receivable channels. During auto channel set the channel numbers are displayed as they are scanned and set.

●When Plug & Play has been completed successfully the correct time is displayed.

●If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.



During Initial Auto Clock Set			During Auto Channel Set			Plug & Play Completed
"Auto" blinks.			The channel numbers are displayed			The current time (including
			as they are scanned and set.			AM/PM) is displayed.

* If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.

HR-S7600U-EN01-23

8

99.4.28, 2:01 PM

Image 8

Contents HR-S7600U Dear Customer Do not place the VCRInstallation Antenna Installation InstructionsServicing Before YOU Install Your NEW VCRUSE Contents Connections Back of VCR Video CableRF Cable supplied Connect VCR to TVPlug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetInformation Language Access Clock SET ClockPreparation Scan #Select D.S.T. Mode SET Auto Clock to onSelect Host Channel Semi-AutoSelect Time Zone Return to Normal ScreenSET Time SET DateAccess Main Menu Screen Access Tuner SET ScreenTuner SETAccess Manual ChannelAdd Or Delete a Channel Time Scan #Cable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRAccess Cable BOX SET Turn on Cable BOXSelect Cable BOX Output ChannelAccess Cable BOX Brand SET Screen Initial SettingsEnter Cable BOX Brand MenuDBS receiver DBS Receiver ControlConnect DBS Receiver To VCR Access Initial SET Screen Access DBS Receiver SET ScreenTurn on DBS Receiver Set DBS Receiver Output Channel & DBS Receiver BrandAccess DBS Receiver SET DBS Receiver BrandSimple Playback Simple Recording Playback Features Activate FRAME-BYFrame Playback Still Picture/Frame-By- Frame PlaybackAccess Distant Code Engage Manual Tracking ModeAdjust Manual Tracking Start SearchAccess Function SET Screen Select Picture Control SET ModeLayback and Recording Features Picture ControlSelect The Soundtrack Video StabilizerStart Repeat Stop RepeatAccess Function SET ModeSuperimpose Select Superimpose SETAccess Main Menu Screen AV Compu Link PlaybackMake Connection ExampleAccess Skip Menu Select ModePerform Movie AdvanceCommercial Advance Commercial Advance works as followsSelect CA Playback SET Mode Return to Normal ScreenPress CH 5 or Time CA RECORD, then pressAudio signal during TimeScan Time ScanVariable-Speed Search/ Reverse Motion Playback Playback tape 1 2 3 4Skip Over Unwanted Sections Skip SearchSpeed Audio output Pro-SlowON/OFF as required Default setting is on TimeScan AudioTimescan AUDIO, then To set to on or OFFDigital R3 SET ModeDigital TBC/NR Active Video Calibration Video CalibrationStart Playback PlaybackRecording Recording Features VHS Super VHS, S-VHS ET and VHS Select S-VHS ET SET Mode Super VHS ETPress S-VHS ET. The button lights up PanelStereo And SAP Second Audio Program To Record SAP ProgramsTo move the on-screens audio levels by one VCR Plus+ Timer Programming Timer RecordingNumber Enter Pluscode NumberCheck Program Data Engage Timer ModeEN Timer Recording VCR Plus+ Setup VCR Plus+ Guide Channel MatchingInitial SET, then press OK or Time Scan #Access Guide Channel SET Screen Input Guide Channel NumberInput Receiving Channel Number Press CH5, Time ScanSET Channel Number Express Timer ProgrammingSET Program Date If you are using a DBS receiver Press SP/EP to set the tape speedUnless DBS Receiver SET is Set to OFF pg , Band indication TV or CatvCancel or Revise a Program RE-ENGAGE TimerCheck, Cancel And Revise ProgramsSelect Auto SP=EP Timer SET Mode Auto SP=EP TimerAuto Timer Or Time Scan %ÞInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press REC on the front panelBefore performing the following steps Engage Auto Satellite Prog REC ModeAutomatic Sat- ellite Program Recording Edit To Or From Another Edit From a Camcorder EditingEnable Remote Pause Function Return to Normal Screen Set your VCR to its record modeStart Player Start RecorderReset the Counter Insert EditingLocate END Point Locate Start PointEND Insert Editing Engage Insert EditingStart Editing SET RECORDER’S Input Mode Audio DubbingEngage Audio Dubbing Start DubbingSpeci AL Features EN TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeEN Special Features Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Operate Cable BOXDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverEnter DBS Receiver Brand Operate DBS ReceiverUnplug Vcrs Power SET Remote ControlPlug in Power Cord Turn VCR Power onMake sure the cassettes window is Troubleshooting ENCassette gets stuck partway Timer again RoubleshootingOther Problems When scanning channels, someWhat happens if the tape runs out during recording? Can the VCR indefinitely remain in the still mode?Can the VCR indefinitely remain in the Record-Pause mode? MBR Multi-Brand Remote Code Setting VCR Plus+ Timer ProgrammingIndex List Of TermsFront View Rear View Remote Control EN Index20C to 60C -4F to140F Video connectors in x 2, OUT xSpeci Fications HOW to Locate Your JVC Service Center Limited Warranty HR-S7600U