JVC HR-S7600U manual SET Auto Clock to on, Select Host Channel, Select D.S.T. Mode, Semi-Auto

12ENINITIALSETTINGS(cont.)

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting manually.

CH

− +

OK

MENU

1 2 3

2

4 5 6

7 8 9

0 4

1

3 OK

MENU

TIME SCAN

5

6

7

SET AUTO CLOCK TO ON

At the Clock Set screen,	CLOCK SET
press OK or TIME SCAN #
	TIME	DATE YEAR
repeatedly to move the
highlight bar to "AUTO	1:00PM	12/24	99 FRI
	AUTO CLOCK : ON
CLOCK" and press CH 5°			(CATV)
	HOST CH	: AUTO
or TIME SCAN %Þto set	D.S.T.	: AUTO
to "ON".	TIME ZONE	: AUTO
	PRESS (5,°), THEN (OK)
a– To select the Host
	PRESS (MENU) TO END

Channel — go to step 6

b– To select the D.S.T. mode — go to step 7 c– To select the Time Zone — go to step 8

NOTE:

The time that has been set previously will be erased when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" setting is changed.

SELECT HOST CHANNEL

You can either select "AUTO" or enter a PBS channel number. Move the highlight bar to "HOST CH" by pressing OK or TIME SCAN #, then press CH 5° or TIME SCAN %Þ to set to "AUTO" or the desired PBS channel number.

NOTE:

There are some PBS channels that do not transmit clock setting data.

SELECT D.S.T. MODE

You have three choices:

a– Select "AUTO" and the adjustment to your VCR's clock will be made according to the incoming signal from the host channel.

b– Select "ON" and the adjustment will be made based on the clock itself.

c– Select "OFF" if Daylight Saving Time does not apply to you.

Move the highlight bar to "D.S.T." by pressing OK or TIME SCAN #, then press CH 5° or TIME SCAN %Þ to select the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

HR-S7600U-EN01-23 12 99.4.28, 2:01 PM