PLAYBACK
EN13
Basic
Playback
Turn on the TV and select the VIDEO channel (or AV mode).
PLAY
STOP/EJECT | FF |
| REW |
| LAY |
| 1 |
| FF |
REW
The easiest, most basic operation possible with your video recorder is tape playback.
1 |
| LOAD A CASSETTE |
Make sure the window side is up, the rear label side is | ||
| facing you and the arrow on the front of the cassette is | |
| point toward the recorder. Don’t apply too much | |
|
| pressure when inserting. |
|
|
|
|
| ● The recorder power comes on automatically and the |
|
| counter is reset to 0:00:00. |
|
| ● If the record safety tab has been removed, playback |
|
| begins automatically. |
|
|
|
|
| FIND PROGRAMME START |
2 |
| POINT |
If the tape is advanced past the start point, press REW. | ||
| To go forward, press FF . | |
| START PLAYBACK | |
3 |
| |
Press PLAY. “BEST” appears blinking in the recorder's | ||
| display panel during automatic tracking. (☞ pg. 24) | |
4 |
| STOP PLAYBACK |
Press STOP on the remote or STOP/EJECT on the | ||
| recorder’s front panel. Then press STOP/EJECT to | |
| remove the cassette. |
STOP
3
Tape Position Indicator
Usable cassettes
The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “5” in relation to “0”
(beginning) or “+” (end) 0 + shows you where you are
on the tape.
”O.S.D.” (☞ pg. 10) must
be set to “ON”, or the Beginning indicator will not appear.
3
+ +
1:23:45 REMAIN 2:35
End
● Compact VHS camcorder recordings can be played on |
this video recorder. Simply place the recorded cassette |
into a VHS Cassette Adapter and it can be used just like |
any |
● This video recorder can record on regular VHS and |
NOTE:
Depending on the type of tape used, there may be times when the indication is not correct.
Super VHS cassettes. While only VHS signals can be |
recorded on regular VHS cassettes, both VHS and Super |
VHS signals can be recorded and played back using |
Super VHS cassettes. |