JVC HR-S9500EH Override Automatic Tracking, Adjust Tracking, Manually, Return to Automatic

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 14).

To resume normal playback, press PLAY.

NOTE:

Variable-speed search with TimeScan (☞ pg. 18) can be used

by pressing the remote control'sÞor %button.

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

OVERRIDE AUTOMATIC

TRACKING

1	Press	on the remote to engage manual tracking.
	ADJUST TRACKING
2	MANUALLY
	Press TV PROG + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press	on the remote to re-engage automatic
3 tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

EN15

Index Search
Your recorder automatically marks	£ 2
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

PressÞor%(ª or £). “ª 1” or “£ 1” is
	displayed on screen and search begins in the corre-
1 sponding direction.
	● To access index codes 2 through 9, pressÞor%
	repeatedly until the correct index number is displayed.
	Ex.: To locate the beginning of B from the current
	position, pressÞtwice.
	To locate the beginning of D from the current
	position, press%once.
		Current position
		A	B		C	D E	F
		–2		–1	1	2	3
				%		%	Index	number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 32).

To return to normal playback during a Skip Search, press PLAY.