JVC HR-S9500EH Insert Editing, SET Input Mode, Locate END Point, Reset the Counter

40ENEDITING(cont.)

Insert Editing

Recorder	Your recorder
	TV PROG

PAUSE

Audio/Video signal

S-video signal

Another recorder

Player

1		2	3
			2
4		5	6
7		8	9
0000		0	4
			TV PROG
NUMBER	"0"
1
			PAUSE
			3

JOG/SHUTTLE

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Source tape

Before insert editing	Normal
Recorded tape	Audio track

After insert editing	Video/Hi-Fi
	audio track

MAKE CONNECTIONS

1 Connect the player's VIDEO OUT or S-VIDEO OUT and AUDIO OUT connectors to your recorder's VIDEO or S-VIDEO and AUDIO input connectors on the front panel.

2	SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG so that "F-1"
	for the VIDEO/AUDIO input connectors or "S-1" for S-
	VIDEO/AUDIO input connectors appears in place of a
	channel number.

		LOCATE END POINT
	Load the recording cassette into your recorder, and play
		it back to determine the edit-out point (the end of the
3 segment to be replaced) using the SHUTTLE ring or the
		JOG dial or pressingÞ%and PAUSE.
		● To use the JOG dial/SHUTTLE ring, first press the
		JOG/SHUTTLE button on the remote control so that
		the button lights up.
		RESET THE COUNTER
4 Press 0000 to change the counter display to "0:00:00".
5		LOCATE START POINT
	Determine the edit-in point (the beginning of the
		segment to be replaced) using the SHUTTLE ring or the
		JOG dial or pressingÞ%and PAUSE.
		● Be sure to engage the Still mode at the edit-in point.

JOG SHUTTLE