JVC SR-9240E Monitor ON-SCREEN Display, On-Screen Display in the Time/Date and Record Modes, Off

4 MONITOR ON-SCREEN DISPLAY

Status information and other data including date/time, alarm input data, power loss (power failure) data and total operation hours can be displayed on a connected monitor. Function settings can be switched via the on-screen function menu switches and menu screens are also provided for timer recording program setting and date/time setting.

•Normally, the time/date data is shown on screen.

•Additional data displays and menu screens can be displayed by pressing the [MENU] button. This calls up the main menu screen where you can select items as desired.

4-1 On-Screen Display in the Time/Date and Record Modes

Time/date and recording mode data is recorded and displayed on screen.

In the Stop, Record and Record Pause modes, data is superimposed on the input video signals.

•The on-screen display can switched ON/OFF using the <POSITION> switch in the function menu's ON SCREEN MODE setting screen. You can also change the on-screen display position using this switch.

Menu switch	Hour
<POSITION> setting		Minute
			Second
				Recording mode
	1	2 : 3	0 : 4	5 3	H
	1 1 – 6 – 1 9 9 9
			Year (last two digits)
		Month
• "L-UP"	Day

Recording mode

3 H 1 2 : 3 0 : 4 5 1 1 – 6 – 1 9 9 9

•"R-UP"

•"R-BOTTOM"

1 1 – 6 – 1 9 9 9

3 H 1 2 : 3 0 : 4 5

Recording mode

Display

5Connect the VCR's video output connector to the

1monitor's video input connector.

2Turn the power on (monitor and VCR).

•When a video signal is input to the video input connector, time/date, and recording mode are superimposed on the picture.

•If there is no signal input, display data is superimposed on a black background.

*If the date and time have not been set, correct date and time indications are not available.

5If no on-screen data is displayed, set the <POSITION> menu switch in the function menu's ON SCREEN MODE setting screen to the desired position (except "OFF").

5Changing the display position

You can select the position on screen where data is displayed with the <POSITION> menu switch in the ON SCREEN MODE setting screen. Data can be displayed in any one of the four corners of the screen.

Setting of the menu switch <POSITION>

– L-UP	: Left top (factory setting)
– R-UP	: Right top

–R-BOTTOM : Right bottom

–L-BOTTOM : Left bottom

– OFF	: Display is off. No indications are
	shown.

●For "Function menu switch setting", refer to page 19.

•"L-BOTTOM"

1 1 – 6 – 19 9 9

1 2 : 3 0 : 4 5 3 H

•In the Record mode, on-screen time/date and recording mode data is recorded together with video signals.

If you do not want to record on-screen data, set the <POSITION> menu switch to "OFF".

•In the Play mode, on-screen data recorded on the tape is displayed.

Recording mode

16