JVC SR-9240EK appendix Timer Recording, Setting the daily timer

7 RECORDING

7-3 Timer Recording

Two types of timer recording are available: daily timer (by specifying the date) and weekly timer (by specifying the day of the week).

• Daily timer : Set the date to any date within one year of the current date. Up to 8 programs can be set.

•Weekly timer : Set the day of the week. Recording will automatically be performed on that day each week. You can program the timer using the on-screen menu display.

[OPERATE] button	[MENU] button		[SHIFT–] button
			[SHIFT+] button
	COUNT/	MENU	SHIFT/TRACKING	RESET
	CLOCK			/CANCEL
	TIME	TIMER	SET/V.LOCK	AL/PL
	MODE	REC		RESET

[TIMER REC] button

[SET+] button

[SET–] button

Note:

•Timer programming is not possible if the date and time have not been set.

Preparation

•Make sure all necessary equipment is properly connected to the input/output connectors on the rear panel.

•Check the current time.

•Load a cassette with the safety tab in place. If the power is off, loading the cassette automatically turns the VCR on

(auto power on function). 1

Main menu screen

MAIN MENU

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Daily timer program setting screen

PROGRAM TIMER

( DAILY) S T A R T E N D MODE

1.– – – – – – – : – – – – : – – – – H

2.– – – – – – – : – – – – : – – – – H

3.– – – – – – – : – – – – : – – – – H

4.– – – – – – – : – – – – : – – – – H

5.– – – – – – – : – – – – : – – – – H

6.– – – – – – – : – – – – : – – – – H

7.– – – – – – – : – – – – : – – – – H

8.– – – – – – – : – – – – : – – – – H PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

Weekly timer program setting screen

PROGRAM TIMER

(WEEKLY) S T A R T E N D MODE

( MON )		– – : – –	– – : – –	– – H
( TUE )		– – : – –	– – : – –	– – H
( WED )		– – : – –	– – : – –	– – H
( THU )		– – : – –	– – : – –	– – H
( F R I	) – – : – – – – : – – – – H
( SAT	)	– – : – –	– – : – –	– – H
( SUN	)	– – : – –	– – : – –	– – H

PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

Setting the daily timer

2Turn on this unit and the monitor.

Press the [MENU] button.

3[The main menu screen is displayed on the monitor.

Press the [SHIFT +] or [SHIFT -] button to move the cursor arrow to <PROGRAM TIMER> in the main menu, then press the [SET +] or [SET -] button.

[The daily timer program setting screen is displayed.

•<DAILY> is shown on the second line of the daily timer program setting screen.

•If the date and time have not been set, the date and time setting screen will be shown. Once the correct date and time have been set, repeat steps 2 and 3.

When the weekly timer program setting screen is displayed, <WEEKLY> is shown on the second line.

• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to

<WEEKLY> and press the [SET +/-] or [SET -] button. [The daily timer program setting screen is displayed.

28