JVC SR-9240E Setting of the Function Menu Switches, Contents of the Function Menu Switches

5 SETTING OF THE FUNCTION MENU SWITCHES

5-2 Contents of the Function Menu Switches

Three function menu switch setting screens are available.

[ ]: Factory setting

Screens	Items	Set values				Function
On-screen	POSITION	[L-UP]	Sets the on-screen position of time/date and recording mode data. If no on-
mode setting		R-UP	screen display is required, use this menu switch to turn it off.
		R-BOTTOM	L-UP			: Display is shown in the top left corner of the screen.
			R-UP			: Display is shown in the top right corner of the screen.
		L-BOTTOM	R-BOTTOM			: Display is shown in the bottom right corner of the screen.
		OFF	L-BOTTOM			: Display is shown in the bottom left corner of the screen.
			OFF			: The on-screen display is not shown.
VTR mode 1	SHARPNESS	[NORMAL]	Selects the picture quality in the Play mode.
setting		SHARP	NORMAL			: Normal picture quality.
			SHARP			: Picture contours are emphasized.
	VIDEO MODE	[AUTO]	Allows you to force Black and White recording regardless of the type of signal
		B/W
			input.
			AUTO : Normally set to this mode. Recording automatically conforms to the
					type of signal input (Colour or Black and White).
			B/W : Even if a colour video signal is input, recording is performed in the
					Black and White mode. A higher resolution picture can be obtained
					than in the Colour mode.
	AUTO REC	[OFF]	Enables or disables automatic external timer recording or automatic restart of
		ON	recording after a power failure.
			OFF		: External timer recording or automatic recording after power failure is
					disabled.
			ON		: Recording starts automatically when power is turned on.
	REC CHECK	[MANUAL]	Sets whether or not Recording Check is automatically performed at the
		AUTO	beginning of a tape in the Repeat Recording mode. Also sets what action is
			taken if picture quality is found to be defective when Recording Check is
			activated with the [REC CHECK] button.
			MANUAL:
			•	If picture quality is found to be defective when Recording Check is activated
				with the [REC CHECK] button, head cleaning is performed once and recording
				resumes. The error indication "E-09" is shown on the display for 10 seconds.
			•	Automatic Recording Check is not performed at the beginning of a tape set to
				record repeatedly.
			AUTO:
			• If picture quality is found to be defective when Recording Check is activated
				with the [REC CHECK] button, head cleaning is performed and recording
				resumes for several seconds, then the recording is automatically checked
				again. If the picture quality is still defective, head cleaning is performed again
				and the error indication "E-09" is shown on the display. The error indication
				remains displayed while recording continues.
			• Automatic Recording Check is performed at the beginning of a tape set to
				record repeatedly.
				If the picture quality is defective, Recording Check is performed again. If the
				picture quality is still defective, head cleaning is performed again and the error
				indication "E-09" is shown on the display. The error indication remains
				displayed while recording continues.
	TAPE END	[STOP]	Sets the operation mode when the tape ends in the Record mode.
	MODE	REW	( In the Play and FF modes, the tape stops.)
		REPEAT	STOP		: The tape stops.
		EJECT	REW		: The tape automatically rewinds and enters the Stop mode.
			REPEAT : In the Record mode, the tape automatically rewinds and then restarts
					recording (repeat recording).
			EJECT		: The tape is ejected.
				The operation mode at tape end during recording, in the case
				when alarm or sensor recording is executed even once, can be
				set with the menu switch <TAPE END MODE> on the alarm/
				sensor recording mode setting screen.

20