2 CONTROLS AND CONNECTORS
2-1 Front Panel
7Display section
For details, refer to page 10.
8[COUNT/CLOCK] button
Press this button to select the time display or tape counter in the display.
When the power is turned off, the time is displayed.
9[TIME MODE] button
Use to select the recording or playback time mode. Each time this button is pressed, the recording/playback time mode changes in the following sequence.
3H (VHS SP mode) [ L12H[ L24H[ 48H[
72H[ 96H[120H[ 168H[ 240H[ 3H (VHS SP mode) ....
The selected recording/playback time mode is shown on the display.
0[TIMER REC] button
Press this button to execute the timer recording. For details, refer to "Timer Recording" on page 28.
![MENU] button
Press this button to display the date/time setting, timer program setting, various function menu setting and hour meter. Press again to cancel the display.
@[SHIFT/TRACKING +, -] buttons
•Press to select an item in date/time setting, timer program setting and function menu setting.
•Press to adjust tracking and reduce noise if there are tracking problems in the 3H (VHS SP) mode or during
search.
*Tracking adjustment is not possible in the Timelapse Play mode.
#[SET/V. LOCK +, -] buttons
•Press to set values in date/time setting, timer program setting and function menu setting.
•Press to reduce the vertical shifting of the picture in the Still mode.
$[RESET/CANCEL] button
•Normally press this button to reset the tape counter to 0000.
•When the buzzer sounds, press this button to stop the buzzer sound.
•In the Timer Program Setting mode, press this button to cancel the program settings. For details, refer to "Timer Recording" on page 31.
%[AL/PL RESET] alarm/power loss reset button Press this button to stop alarm recording or reset the alarm input or power loss data. For details, refer to page 34.
^[OPE. LOCK] button
Press to activate the operation lock function.
9