6 PREPARATION
6-1 Cassette Loading/Unloading
Loading
Turn on the main power.
Insert the cassette with its label side facing you.
Gently push the center of the cassette until the machine starts automatic loading.
[EJECT] button
( |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
) indication |
|
| [TIMER REC] button | ||||||
| TIMER indication |
|
|
|
| ||||
Note:
•Do not force to push in the cassette if the main power is not on. Doing so could damage the tape when the power is turned on.
•To avoid damage or injury, do not insert your hand or other foreign objects into the cassette loading slot..
Auto power on
When a cassette is loaded, the power automatically turns
on and the ( 
) cassette indication appears.
Auto play
When a cassette with no erasure prevention tab is loaded, playback starts automatically.
Unloading
5Press the [EJECT] button.
[ The cassette is ejected.
If the power is not on when the [EJECT] button is pressed, power is automatically switched on and the cassette is ejected. Once the cassette is unloaded, the power turns off again automatically.
If the Timer Recording Standby mode is engaged (TIMER indication is shown on the display), the cassette will not be ejected when the [EJECT] button is pressed.
To unload the cassette, press the [TIMER REC] button to release the Timer Recording Standby mode, then press the [EJECT] button.
6-2 Date and Time Setting
The time/date generator and timer recording will not function if the date and time are not set.
The time/date setting can be enabled on the CLOCK ADJUST menu screen or the front panel display.
|
|
| [SHIFT |
|
[OPERATE] button | [MENU] button | [SHIFT +] button | ||
| COUNT/ |
| SHIFT/TRACKING | RESET |
| CLOCK | MENU |
| /CANCEL |
| TIME | TIMER | SET/V.LOCK | AL/PL |
| MODE | REC |
| RESET |
[SET
•
•If the power cable has been unplugged for a long time of period, check the current time before using the VCR. (Time shift may occur under certain operating or environmental conditions.)
23