JVC SR-9240EK Playback and SPECIAL-EFFECTS Playback, Special-Effects Playback, 1Reverse playback

Page 40

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

[REVERSE] button

[PLAY] button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[REW] button

[FF] button

 

[PAUSE/STILL] button

8-3 Special-Effects Playback

1Still and field/frame advance

Press the [PAUSE/STILL] button during playback.

The still indicator is shown on the display and a

2still picture is displayed.

Each time the [PAUSE/STILL] button is pressed in the

3Still mode, the picture is advanced one field.

Press the [PLAY] button to restore the Normal Play mode.

The Stop mode is automatically engaged if the VCR remains in the Still mode for 5 minutes (approx.).

1Reverse playback

Press the [REVERSE] button in the Play or Still mode.

The reverse indicator is shown on the display and the Reverse mode is engaged.

Reverse playback is executed at VHS SP mode speed. When the play time mode is set to 3H,L12H or L24H, reverse playback is executed at the VHS SP mode’s speed.

2* No sound is output.

To return to the Normal Play mode, press the [PLAY] button.

Shuttle search (reverse and fast-forward) playback

Reverse shuttle search

Press the [REW] button during play.

The rewind search indicator is shown on the display and the Reverse Shuttle Search mode is engaged.

* No sound is output.

Fast-forward shuttle search

Press the [FF] button during playback.

The fast-forward search indicator is shown on the display and the Fast-Forward Shuttle Search mode is engaged.

* No sound is output.

Shuttle search operations vary according to how the [REW] or [FF] button is pressed. Refer to the table below for details.

Operation of the [REW] or

Tape recorded in the Standard mode or the Timelapse mode

[FF] button

 

 

 

Press the button once.

9 times normal speed (lock). Pressing the [PLAY] button restores the Normal Play mode.

 

 

Hold the button pressed

9 times normal speed. Releasing the finger restores the Normal Play mode.

for more than 2 seconds.

 

 

 

Note

Still and Reverse Play modes are not available with tapes recorded in the Long Play (LP) mode.

41

Image 40
Contents SR-9240EK Safety Precautions For Your Safety AustraliaConnection to the mains supply DanishOperation Lock Lock indicator Time Mode buttonButton Contents Periodical Maintenance Major FeaturesIntroduction Introduction PrecautionsDaily Inspection Controls and Connectors Front PanelControls and Connectors Display Rear Panel Series recording signal input VCR activation signal inputClock reset signal input Connecting the wires to the terminals 9 toConnecting to a Camera ConnectionsConnections Connecting a System Using a Sequential SwitcherVideo cameras Connecting the Rear Panel Input/Output Terminal Connections Monitor ON-SCREEN Display On-Screen Display in the Time/Date and Record ModesBottom DisplayMain Menu Display Monitor ON-SCREEN DisplayOperation Alarm Input/Power Loss Data Display Hour Meter Display1Operation 4METERSetting of the Function Menu Switches Function Menu Switch SettingPreparation 3FUNCTIONSetting of the Function Menu Switches Contents of the Function Menu SwitchesIndex OFF SearchCamera SW OFF FieldAlarm/sensor Recording modeRS-232C ParameterDate and Time Setting Auto power onPreparation Cassette Loading/UnloadingSet the date and time using the Clock Adjust menu 1screen PreparationSet the date and time on the front panel display Year Month DAY Hour MinuteSelection of Record/Play Mode Mode indicationSummer Time Compensation 1During daylight savings timeRecording PreparationRecording RecordingTimer Recording Setting the daily timerVCRs display BlinkingSetting the weekly timer Start time hourCanceling timer programming To stop timer programmingTo cancel a preset timer program To cancel programmed data1Changing a preset timer program Using the VCR in the Timer Record Standby modeAlarm Recording Timelapse Alarm Recording recording Alarm signal inputAlarm RecordingStop Alarm/sensor recording mode setting screenREW 1Preparation Sensor RecordingEject Repeat Recording Check functionSeries Recording Connections1Operations Rear panelRecording with External VCR Activation Signal ConnectionOperation TerminalHow to Restore Recording After Power Failure External Timer RecordingTape End Buzzer Auto RECFunction menu switch settings Playback and SPECIAL-EFFECTS PlaybackPlayback 5To stop playbackPlayback and SPECIAL-EFFECTS Playback Special-Effects Playback1Still and field/frame advance 1Reverse playbackTracking/V. Lock Adjustment Index SearchIndex Tracking +/- button Lock +/- buttonError Indication TroubleshootingError Contents VCR operation Measures Troubleshooting No Error IndicationTop cover Installation of the SA-K97USA-K97U SA-K97U RS-232C Protocol & Commands SA-K97U SpecificationsOptional SA-K97U RS-232C Interface Board VCR control commands VCR setting commands Mode 1st byte 2nd byte1st byte 2nd byte 3rd byteCancel 67H AL/PL Reset E1HCount Reset E2H 8EHCommands for VCR status verification 1st/2nd byte3rd byte 5th byte 4th byte 6th byteContents of 5th byte BIT 0/1/2/3 Speed Code 4th byteOthers Input data correction/Error cancellation Commands reference chartAppendixes Tape Reel Counter/Tape Remaining Time TableAppendixes Rear Panel’s Input/OutputSpecifications Victor Company of JAPAN, Limited