JVC Model HR-J660EK setup guide Storing Channels Manually

34SUBSIDIARYSETTINGS(cont.)

Storing Channels Manually

NUMBER

1

1 2 3

4 5 6

7 8 9

0

?

2

4

To store channels that were not stored during Auto Set Up (☞ pg. 6) or Auto Channel Set (☞ pg. 32).

ACCESS MAIN MENU SCREEN

1 Press MENU.
	ACCESS CONFIRMATION
	SCREEN
	Press %Þ to move the highlight bar (pointer) to
	“MANUAL CH SET”, then press OK or #. The Confirma-
2 tion screen appears.
	SELECT POSITION
	Press %Þ @ # until an	(Ex.) To store in position 6.
	open position in which	PR	CH	ID	PR	CH ID
3 you want to store a
		01	26	BBC1	08	– – – –

ENU	OK
	3

ATTENTION

Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer program- ming with VIDEO Plus+ in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. ☞ “ATTENTION – Regarding Guide Program Number Set” on pg. 13.

Or perform “Guide Program Number Set” (☞ pg. 40).

	channel begins blinking,		02		33	BBC2	09	– – – –
	then press OK. The Manual		03		23	ITV	10	– – – –
			04		30	CH4	11	– – – –
	Channel Set screen		05		37	CH5	12	– – – –
	appears.		06			– – – –	13	– – – –
			07			– – – –	14	– – – –
			[5°55]
			=		: EDIT
				= [X] : DELETE
				[MENU] : EXIT
		The blueback screen and the
		programme currently being
		broadcast by the selected channel
		appear alternately for 8 seconds
		each.
4	INPUT CHANNEL
	Press the NUMBER keys to
	input the channel number
	you want to store.			PR	CH	ID	FINE
				06	CH21 ––––		+/–
	For HR-J665ES Owners:
	First press %Þ to select the
	band, either CH(regular) or		[0–9] : SELECT
	CC(cable), and press #,		[°°] : CURSOR +=
					: OK
	then input the channel		[MENU] : EXIT
	number.	The blueback screen and the
	● To input the registered
		programme currently being
	station name	broadcast by the selected channel
	(ID – ☞ pg. 37),
		appear alternately for 8 seconds
	press # until "– – – –"	each.
	(ID setting) begins
	blinking, then press %Þ.

●For fine tuning adjustment, press # until "+/–" begins blinking, then press %Þ. While tuning, “+” or “–” appears.

	ENTER NEW CHANNEL
5	INFORMATION
	Press OK and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.
6	CLOSE CONFIRMATION SCREEN
	Press MENU.
	● To change positions, see "Change Station Preset
	Position" (☞ pg. 35).
	● If you wish to set station names other than the ones
	registered in your recorder, ☞ "Set Stations (B)" on
	page 36.