JVC Model HR-J660EK setup guide Recording

10BASICOPERATIONS(cont.)

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

					5	PLAY
	1
					DISPLAY
STANDBY/ON
TIMER
VIDEO(MONO)L –AUDIO– RREC LINK				TV PROG
	2	TV	PROG	RECORD		STOP/EJECT
					6		5
			4				PAUSE

TV/VCR

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

LOAD A CASSETTE

1 Insert a cassette with the record safety tab intact (See below).

●The counter is reset to 0:00:00 and the recorder power comes on automatically.

	CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 preset you wish to record.
	SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
	recorder display panel to confirm the selected tape
3 speed.
	● Picture quality of LP recordings will not be as high as
	on SP recordings.
4	START RECORDING
	Press and hold RECORD and press PLAY on the remote
	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the

2

NUMBER

1

4 RECORD

1 2 3

2

4 5 6

7 8 9

0 4

TV PROG 2

SP/LP 3

?

PLAY 4,5

PAUSE 5

3

	cassette (☞ pg. 18).
	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 5.
	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.
	● During the Record Pause mode, you can change the
	preset by pressing the TV PROG +/– buttons or the
	NUMBER keys.
	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
6 the recorder. Then press STOP/EJECT to remove the

6 STOP

cassette.

INFORMATION

When using the AV connection (☞ pg. 5), you can switch between TV mode and AV mode by pressing TV/VCR.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab