JVC SR-9168U Playback and SPECIAL-EFFECTS Playback, Special-Effects Playback, Reverse playback

Page 39

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

[REVERSE] button

[PLAY] button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[REW] button

[FF] button

 

[PAUSE/STILL] button

8-3 Special-Effects Playback

Still and field by field advance

1Press the [PAUSE/STILL] button during playback.

The still indicator is shown on the display and a still picture is displayed.

2■ Each time the [PAUSE/STILL] button is pressed in the

Still mode, the picture is advanced one field.

3Press the [PLAY] button to restore the Normal Play mode.

The Stop mode is automatically engaged if the VCR remains in the Still mode for 5 minutes (approx.).

Reverse playback

1Press the [REVERSE] button in the Play or Still mode.

The reverse indicator is shown on the display and the Reverse mode is engaged.

Reverse playback is executed at 6H (EP) mode speed. When the play time mode is set to L18H or L30H, reverse playback is executed at the 6H (EP) mode’s speed.

* No sound is output.

2To return to the Normal Play mode, press the [PLAY] button.

Note

Still and Reverse Play modes are not available with tapes recorded in the Standard Play (SP) mode.

Shuttle search (reverse and fast-forward) playback

Reverse shuttle search

Press the [REW] button during play.

The rewind search indicator is shown on the display and the Reverse Shuttle Search mode is engaged.

* No sound is output.

Fast-forward shuttle search

Press the [FF] button during playback.

The fast-forward search indicator is shown on the display and the Fast-Forward Shuttle Search mode is engaged.

* No sound is output.

Shuttle search operations vary according to how the [REW] or [FF] button is pressed. Refer to the table below for details.

Recorded condition of the

Tape recorded in the 6H, L18H or

Tape recorded in the SP mode

tape

Operation of the [REW] or

L30H mode

 

 

 

[FF] button

 

 

 

 

 

 

The tape is played back at 21 times the

The tape is played back at 7 times the

Press the button once.

normal VHS EP speed. (Latch mode)

nomal VHS SP speed. (Latch mode)

 

Pressing the [PLAY] button resumes

Pressing the [PLAY] button resumes

 

normal-speed playback.

normal-speed playback.

Hold the button pressed

The tape is played back at 13 times the

The tape is played back at 7 times the

normal VHS EP speed.

normal VHS SP speed.

for more than 2 seconds.

Releasing the button resumes normal-

Releasing the button resumes normal-

 

 

speed playback.

speed playback.

 

 

 

• Latch mode: The Shuttle Search continues even if the button is released.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents For Customer Use Video Cassette Recorder SR-9168UINSTRUCTIONSInformation Safety PrecautionsContents Introduction Major FeaturesPeriodical Maintenance Periodic MaintenancePrecautions IntroductionDaily Inspection Front Panel Controls and ConnectorsControls and Connectors Display Rear Panel Connecting the wires to the terminals 9 to Series recording signal inputVCR activation signal input Clock reset signal inputConnections Connecting to a CameraVideo cameras Connecting a System Using a Sequential SwitcherVideo output Camera Sequential switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections Display Position settingMonitor ON-SCREEN Display On-Screen Display in the Time/Date and Record ModesMonitor ON-SCREEN Display Main Menu DisplayOperation SET +/- buttons button Alarm Input/Power Loss Data DisplayHour Meter Display Menu buttonPreparation Function Menu Switch SettingContents of the Function Menu Switches Setting of the Function Menu SwitchesField Index OFFSearch Camera SW OFFAlarm/sensor Parameter SettingRS-232C Cassette Loading/Unloading Date and Time SettingAuto power on PreparationSet the date and time on the front panel display Set the date and time using the Clock Adjust menu screenDate/time setting screen PreparationDuring daylight savings time Selection of Record/Play ModeMode indication Summer Time CompensationPreparation RecordingRecording RecordingSetting the daily timer Timer RecordingBlinking VCRs displaySetting the weekly timer To stop timer programming Cancel program setting screenCanceling timer programming To cancel programmed dataUsing the VCR in the Timer Record Standby mode Changing a preset timer programRecording Alarm RecordingAlarm recording will not start from the Pause mode 6H EP,18HPress the Operate button to turn the operating mode on Tape stopsStops Beginning of the tape Recording mode setting screenSensor Recording Repeat Sensor recording continues fromAuto Recording Check function Repeat RecordingRear panel Series RecordingConnections OperationsOperation Recording with External VCR Activation SignalVCR control signal ground signal ConnectionTape End Buzzer How to Restore Recording After Power FailureExternal Timer Recording VTR mode 1 setting screenTo stop playback Function menu switch settingsSet to on to search the alarm-recorded positions index code PlaybackReverse playback Playback and SPECIAL-EFFECTS PlaybackSpecial-Effects Playback Still and field by field advanceIndex Tracking/V. Lock AdjustmentIndex Search Press the V. Lock +/- button to minimize vertical jitterTroubleshooting Error IndicationError Contents VCR operation Measures No Error Indication TroubleshootingInstallation of the SA-K97U Parity check Stop bit Bit SA-K97U SpecificationsPin no Signals Operations Direction of signals Optional SA-K97U RS-232C Interface BoardSA-K97U RS-232C Protocol & Commands JVC base tableJVC VCR control commands This section provides technical data for programmers3rd byte VCR setting commandsMode 1st byte 2nd byte 1st byte 2nd byte8EH Cancel 67HAL/PL Reset E1H Count Reset E2H4th byte 6th byte Commands for VCR status verification1st/2nd byte 3rd byte 5th byte4th byte Contents of 5th byte BIT 0/1/2/3 Speed CodeCommands reference chart Others Input data correction/Error cancellationRear Panel’s Input/Output AppendixesAppendixes SpecificationsVictor Company of JAPAN, Limited SR-9168U Video Cassette Recorder
Top Page Image Contents