2 CONTROLS AND CONNECTORS
2-2 Display
1 | 6 | 7 | 8 | 9 | 10 | 11 | 12 13 | 14 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 | 3 | 4 | 5 |
1Operation mode display Shows the operation modes.
Playback Recording | Rewind | Fast- | Timelapse | ||
forward | playback | ||||
|
|
| |||
Still | Record- | Rewind | Reverse | ||
pause | search | search | playback | ||
| |||||
* ( 
) mark in the Rec/Pause mode is shown in red.
2
Cassette indication
Lights when a cassette is loaded. Blinks when a cassette is being ejected.
3SP/EP indication
Shows the VHS standard (SP) mode or VHS extended mode (EP) during recording/playback.
During 6H (EP) and Timelapse Recording/Playback mode, the EP indicator is shown.
Recording in the SP mode is not possible with this unit.
4Tape counter/time indication
•When the power is turned on, the tape counter or current time are shown. The display can be selected with the [COUNT/CLOCK] button.
•When the power is turned off, the present time (hour, minute, second) is shown.
5Recording/playback mode time display
•Shows the recording/playback mode set with the [TIME MODE] button.
•When a tape ends in the Record mode, the record time mode indication goes out and the "End" indication blinks (when the <REC REMAIN> menu switch is set to "OFF"). If the <REC REMAIN> menu switch is set to "180S" or "360S", the "End" indication blinks
3 minutes or 6 minutes before the tape ends during 6H mode.
•When an problem occurs, the error indication
blinks. For details, refer to page 41.
6TIMER indication
Lights during timer recording programming/operation.
7REPEAT indication
Lights when the VCR is in the Repeat Record mode.
8OVERLAP indication
Blinks when programs scheduled for timer recording overlap.
9Timer program number
During timer recording, the number of program being recorded blinks.
When the timer recording ends, this number goes out.
0AL (alarm) indication
Shown during alarm recording. Blinks when alarm recording ends.
!VISS indication
Shown when the alarm recording start point is index- searched. For details, refer to “Index Search” on page 40.
@LOCK indication
Lights when the operation lock function is activated.
#AL REC (alarm recording) indication
Lights when the function menu switch <ALARM REC> is set to “ON”.
$SENSOR REC (sensor recording) indication
Lights when the function menu switch <SENSOR REC> is set to “ON”.
8