JVC SR-9168U appendix Controls and Connectors

Page 7

2 CONTROLS AND CONNECTORS

2-1 Front Panel

7Display section

For details, refer to page 8.

8[COUNT/CLOCK] button

Press this button to select the time display or tape counter in the display.

When the power is turned off, the time is displayed.

9[TIME MODE] button

Use to select the recording or playback time mode. Each time this button is pressed, the recording/playback time mode changes in the following sequence. 6H(EPmode)[L18[L30H[48H[72H[96H[ 120H[168H[240H[6H (EP mode) ....

The selected recording/playback time mode is shown on the display.

0[TIMER REC] button

Press this button to execute the timer recording. For details, refer to "Timer Recording" on page 26.

![MENU] button

Press this button to display the date, time setting, timer program setting, various function menu setting and hour meter. Press again to cancel the display.

@[SHIFT/TRACKING +, -] buttons

•Press to select an item in date/time setting, timer program setting and function menu setting.

•Press to adjust tracking and reduce noise if there are tracking problems in the play back mode or during search.

#[SET/V. LOCK +, -] buttons

•Press to set values in date/time setting, timer program setting and function menu setting.

•Press to reduce the vertical shifting of the picture in the Still mode.

$[RESET/CANCEL] button

•Normally press this button to reset the tape counter to 0000.

•When the buzzer sounds, press this button to stop the buzzer sound.

•In the Timer Program Setting mode, press this button to cancel the program settings. For details, refer to "Timer Recording" on page 29.

%[AL/PL RESET] alarm/power loss reset button Press this button to stop alarm recording or reset the alarm input or power loss data. For details, refer to page 32.

^[OPE. LOCK] key

lnsert the provided key into this key hole and turn it to "ON" to lock the VCR in its current mode and disable all controls.

When operation Lock mode is engaged, "LOCK" is shown on the display.

7

Image 7

Contents For Customer Use Video Cassette Recorder SR-9168UINSTRUCTIONSInformation Safety PrecautionsContents Introduction Major FeaturesPeriodical Maintenance Periodic MaintenanceIntroduction PrecautionsDaily Inspection Front Panel Controls and ConnectorsControls and Connectors Display Rear Panel Connecting the wires to the terminals 9 to Series recording signal inputVCR activation signal input Clock reset signal inputConnections Connecting to a CameraVideo cameras Connecting a System Using a Sequential SwitcherVideo output Camera Sequential switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections Display Position settingMonitor ON-SCREEN Display On-Screen Display in the Time/Date and Record ModesMain Menu Display Monitor ON-SCREEN DisplayOperation SET +/- buttons button Alarm Input/Power Loss Data DisplayHour Meter Display Menu buttonPreparation Function Menu Switch SettingContents of the Function Menu Switches Setting of the Function Menu SwitchesField Index OFFSearch Camera SW OFFParameter Setting Alarm/sensorRS-232C Cassette Loading/Unloading Date and Time SettingAuto power on PreparationSet the date and time on the front panel display Set the date and time using the Clock Adjust menu screenDate/time setting screen PreparationDuring daylight savings time Selection of Record/Play ModeMode indication Summer Time CompensationPreparation RecordingRecording RecordingSetting the daily timer Timer RecordingBlinking VCRs displaySetting the weekly timer To stop timer programming Cancel program setting screenCanceling timer programming To cancel programmed dataUsing the VCR in the Timer Record Standby mode Changing a preset timer programRecording Alarm RecordingAlarm recording will not start from the Pause mode 6H EP,18HTape stops Press the Operate button to turn the operating mode onStops Beginning of the tape Recording mode setting screenSensor Recording Repeat Sensor recording continues fromAuto Recording Check function Repeat RecordingRear panel Series RecordingConnections OperationsOperation Recording with External VCR Activation SignalVCR control signal ground signal ConnectionTape End Buzzer How to Restore Recording After Power FailureExternal Timer Recording VTR mode 1 setting screenTo stop playback Function menu switch settingsSet to on to search the alarm-recorded positions index code PlaybackReverse playback Playback and SPECIAL-EFFECTS PlaybackSpecial-Effects Playback Still and field by field advanceIndex Tracking/V. Lock AdjustmentIndex Search Press the V. Lock +/- button to minimize vertical jitterError Indication TroubleshootingError Contents VCR operation Measures No Error Indication TroubleshootingInstallation of the SA-K97U Parity check Stop bit Bit SA-K97U SpecificationsPin no Signals Operations Direction of signals Optional SA-K97U RS-232C Interface BoardJVC base table SA-K97U RS-232C Protocol & CommandsJVC VCR control commands This section provides technical data for programmers3rd byte VCR setting commandsMode 1st byte 2nd byte 1st byte 2nd byte8EH Cancel 67HAL/PL Reset E1H Count Reset E2H4th byte 6th byte Commands for VCR status verification1st/2nd byte 3rd byte 5th byte4th byte Contents of 5th byte BIT 0/1/2/3 Speed CodeCommands reference chart Others Input data correction/Error cancellationRear Panel’s Input/Output AppendixesAppendixes SpecificationsVictor Company of JAPAN, Limited SR-9168U Video Cassette Recorder