JVC hr-dvs3u manual Slow Motion On the Remote, Variable Speed Search On the Remote, Forward

Page 29

EN 29

Still Picture/Frame-By-Frame Playback (On the Remote)

1Pause during playback.

Press PAUSE (9).

2Activate frame-by-frame playback.

Press JOG/SHUTTLE so that the button lights up. Turn the JOG dial to the right for forward frame-by-frame playback, or to the left for reverse frame-by-frame playback.

OR

Press PAUSE (9) to advance a still picture.

OR

Press w for reverse frame-by-frame playback or e for forward frame-by-frame playback.

NOTE:

Still picture playback stops automatically after 5 minutes to protect the heads.

Slow Motion (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion. Release to return to still picture.

OR

During still picture, press and hold PAUSE (9) for more than 2 seconds, then release. Press PAUSE (9) and release again to return to still picture.

OR

During still picture, press and hold w or e. Release to return to still picture.

NOTES:

●During slow motion, some noise may appear on the TV screen. Press CH+/– to eliminate the noise. However, the VCR will return to the default setting once a power failure occurs.

●Slow motion playback stops automatically after 5 minutes to protect the heads.

To resume normal playback, press PLAY (4).

You can also use the Remote's JOG dial/SHUTTLE ring for the operations. First press the JOG/SHUTTLE button on the Remote so that the button lights up before use. Refer to the SHUTTLE ring illustration below as you read the procedures.

Reverse

 

 

 

 

Forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reverse

 

Reverse

Slow

 

Forward

Reverse

slow

Normal

search

motion

search

play

motion

play

4 steps

2 steps

4 steps

 

2 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High-Speed (Turbo) Search (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE ring resumes still picture playback.

OR

During playback or still, press FF (5) for forward high- speed search, or REW (3) for reverse high-speed search.

NOTE:

For short searches, press and hold FF (5) or REW (3) for over 2 seconds during playback or still picture. When released, normal playback resumes.

Variable Speed Search

(On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search.

OR

During playback, press w or e.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY (4).

Page 28 Page 30
Image 29
Page 28 Page 30
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel Remote How To UseON-SCREEN Display for VHS deck 10 ENTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Connect the VCR to power source Check the contents12 EN Situate the VCRVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 14 ENLanguage Clock Set Access the Clock Set screen16 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen18 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels20 EN Installing ControllerTurn on the cable box Access the Cable Box Set screenSelect the cable box’s channel If you do not use a cable box, press rt until OFFEnter the cable box’s brand 22 ENPress OK or e If the cable box’s channel does not change toHow to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver DBS receiverAccess the DBS Receiver Set screen Setting DBS receivers brand and channel24 EN Turn on the DBS receiverJVC Dish Network Echostar Dish Network Access the DBS Receiver Brand Set screenEnter the DBS receiver’s brand VHS deck Basic Playback26 EN Set the tape speed Choose a programStart recording Pause/Resume recordingSlow Motion On the VCR 28 ENActivate frame-by-frame playback Push the Advanced JOG dial Press PauseForward Slow Motion On the RemoteVariable Speed Search On the Remote Index Search 30 ENRepeat Playback Next Function MemoryManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Press C.RESET before starting recording or playback Reset the counterElapsed Recording Time Indication Tape Remaining TimeSecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback DV deck 36 ENSelect the DV deck Press DVDV recording indicator turns off DV recording indicator lights on the VCR38 EN Step Pressing A. Monitor changes the soundtrack as follows 40 ENRight channel are mixed Sound on the right channel isTime Code Access the VCR Plus+ Program screen Access the PlusCode No. screen42 EN Select the deckFor the VHS deck Engage the VCR’s timer modeFor the DV deck Cable Box or DBS Receiver UsersCable Box Control Setting  pg Access the Guide Channel Set screen44 EN Guide Channel Number SetEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingEnter the channel position Enter the program datePress DATE+ Press CH+24HR Quick Programing Enter the program mode48 EN Set the program start/stop time and channelPage 50 EN To cancel or change a programCancel or change program setting When programs overlap each otherConfirm the overlapping programs Select the program to modify52 EN Tape DubbingFrom DV to VHS Dubbing An Entire CassettePress DV, then press SP/LP p Dubbing direction indicator S-VHS lightsFrom VHS to DV Locate the start point on the DV deck 54 ENPrepare the VHS deck for dubbing Pause dubbingPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck 56 EN Edit From a CamcorderPlayer Recorder Video input58 EN Set the input mode of recording deckStart the source player Start the recording deckAdvantages of S-VHS video recorders Connection to a PC with DV connectorConnection to another VCR 60 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing 62 EN Insert EditingVHS Insert Editing Source tape Recording tapeAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing64 EN Access the R.A.Edit screenProgram Editing Memory 8 programs x 8 scenes Select the programPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code for Remote Remote A/B Code SwitchingCheck the remote control code for VCR 66 ENOperate the TV Set the TV brand codeBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keys68 EN Press the corresponding button PowerSet the Cable Box brand code Operate the Cable BoxSet the DBS receiver brand code Turn on the DBS receiver using its RemoteOperate the DBS receiver JVC Dish NetworkAccess the Mode Set screen Mode SetSelect the mode Select the mode settingWhen this function is set to on Display panel 72 ENVHS Mode SET 74 EN While timer-recording in SP modeFor Example Channel not in useSelecting either HI-FI L or HI-FI R Correction to the luminance signal to enhance detailsNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played back76 EN Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundRemote won’t function Batteries are discharged Indicator offConsult your JVC dealer Message appears on the screen78 EN DV deck VHS deck80 EN Playback 82 EN Timer Warning Display Instant Timer Recording ITRGuide Channel Number Set Recording Resume Function84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 31.07 Kb
Top Page Image Contents