JVC hr-dvs3u manual 80 EN

Page 80

80 EN

 

TROUBLESHOOTING (cont.)

TIMER RECORDING (cont.)

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

7.

Cable channels are not automatically

● The Controller is not properly

Connect the Controller correctly

 

switched during timer recording.

connected to the VCR.

( pg. 20).

 

 

● The output channel selected in the

After confirming your cable box’s output

 

 

Cable Box Set screen is incorrect.

channel number, re-access the Cable Box

 

 

 

Set screen and select the correct number

 

 

 

( pg. 21).

 

 

● The cable box is turned off.

Make sure the power is on before timer

 

 

 

recording starts.

 

 

 

 

8.

Satellite channels are not

● The Controller is not properly

Connect the Controller correctly

 

automatically switched during timer

connected to the VCR.

( pg. 23).

 

recording.

● The output channel selected in the DBS

After confirming your DBS receiver’s

 

 

 

 

Receiver Set screen is incorrect.

output channel number, re-access the

 

 

 

DBS Receiver Set screen and select the

 

 

 

correct number ( pg. 24).

 

 

● The VCR is not set correctly to control

Set the correct DBS receiver brand code

 

 

the DBS receiver.

( pg. 24).

 

 

● The DBS receiver is turned off.

Make sure the power is on before timer

 

 

 

recording starts.

 

 

 

 

9.

Timer recording begins as scheduled,

● Even though you do not use an external

Set “CABLE BOX SET” to “OFF”

 

but the channel is always incorrect.

cable box or DBS receiver, “CABLE BOX

( pg. 21) or “DBS RECEIVER SET” is set

 

 

SET” is set to “ON” or “DBS RECEIVER

to “OFF” ( pg. 24).

 

 

SET” is set to “ON”.

 

 

 

 

OTHER PROBLEMS

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Whistling or howling is heard from the

● The camcorder’s microphone is too

Position the camcorder so its microphone

 

TV during camcorder recording.

close to the TV.

is away from the TV.

 

 

● The TV’s volume is too high.

Turn the TV’s volume down.

 

 

 

 

2.

When scanning channels, some of

● Those channels have been designated to

If you need the skipped channels, restore

 

them are skipped over.

be skipped.

them ( pg. 19).

 

 

 

 

3.

The channel cannot be changed.

● Recording is in progress.

Press PAUSE (9) to pause the recording,

 

 

 

change channels, then press PLAY (4) to

 

 

 

resume recording.

 

 

 

 

4.

Channel settings that were made

● After the manual settings were made,

Perform manual setting again.

 

manually seem to have changed or

Auto Channel Set was performed.

 

 

disappeared.

 

 

 

 

 

 

5.

The Remote will not operate your TV

● The brand codes are set incorrectly.

Reset the correct brand codes ( pg. 67,

 

or cable box or DBS receiver.

 

68, or 69).

 

 

 

 

6.

Even though Auto or Semiauto Clock

● The clock setting data received from the

Select a different host channel during

 

Set has been performed, the clock is

host channel is incorrect.

“Semiauto Clock Set” ( pg. 17), or

 

incorrect.

 

perform “Manual Clock Set” ( pg. 17).

 

 

 

 

7.

No picture appears when you connect

 

Turn off the VCR or the connected

 

a device to DV IN/OUT connector.

 

appliance once, then turn it on again.

 

 

 

 

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power cord back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.

Page 79 Page 81
Image 80
Page 79 Page 81
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel How To Use Remote10 EN ON-SCREEN Display for VHS deckTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Check the contents Connect the VCR to power source12 EN Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionPerform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 14 ENLanguage Access the Clock Set screen Clock Set16 EN PreparationsSemiauto Clock Set Manual Clock SetAccess the Tuner Set screen Tuner Set18 EN Auto Channel SetAccess the Manual Channel Set screen Manual Channel SetAdd or skip the desired channels To add channelsInstalling Controller 20 ENAccess the Cable Box Set screen Turn on the cable boxSelect the cable box’s channel If you do not use a cable box, press rt until OFF22 EN Enter the cable box’s brandPress OK or e If the cable box’s channel does not change toIf your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver DBS receiverSetting DBS receivers brand and channel Access the DBS Receiver Set screen24 EN Turn on the DBS receiverJVC Dish Network Echostar Dish Network Access the DBS Receiver Brand Set screenEnter the DBS receiver’s brand VHS deck Basic Playback26 EN Choose a program Set the tape speedStart recording Pause/Resume recording28 EN Slow Motion On the VCRActivate frame-by-frame playback Push the Advanced JOG dial Press PauseForward Slow Motion On the RemoteVariable Speed Search On the Remote 30 EN Index SearchRepeat Playback Next Function MemoryAdjust the tracking manually Manual TrackingSoundtrack Selection Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Reset the counter Press C.RESET before starting recording or playbackElapsed Recording Time Indication Tape Remaining TimeSecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback 36 EN DV deckSelect the DV deck Press DVDV recording indicator lights on the VCR DV recording indicator turns off38 EN Step 40 EN Pressing A. Monitor changes the soundtrack as followsRight channel are mixed Sound on the right channel isTime Code Access the PlusCode No. screen Access the VCR Plus+ Program screen42 EN Select the deckEngage the VCR’s timer mode For the VHS deckFor the DV deck Cable Box or DBS Receiver UsersAccess the Guide Channel Set screen Cable Box Control Setting  pg44 EN Guide Channel Number SetGuide Channel Number Enter the receiving channel position numberExpress Timer Programing 46 ENEnter the program date Enter the channel positionPress DATE+ Press CH+Enter the program mode 24HR Quick Programing48 EN Set the program start/stop time and channelPage To cancel or change a program 50 ENWhen programs overlap each other Cancel or change program settingConfirm the overlapping programs Select the program to modifyTape Dubbing 52 ENFrom DV to VHS Dubbing An Entire CassettePress DV, then press SP/LP p Dubbing direction indicator S-VHS lightsFrom VHS to DV 54 EN Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Edit From a Camcorder 56 ENRecorder Video input PlayerSet the input mode of recording deck 58 ENStart the source player Start the recording deckAdvantages of S-VHS video recorders Connection to a PC with DV connectorConnection to another VCR Audio Dubbing 60 ENVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Insert Editing 62 ENVHS Insert Editing Source tape Recording tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start EditingAccess the R.A.Edit screen 64 ENProgram Editing Memory 8 programs x 8 scenes Select the programLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingRemote A/B Code Switching Set the remote control code for RemoteCheck the remote control code for VCR 66 ENSet the TV brand code Operate the TVBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keysPress the corresponding button Power 68 ENSet the Cable Box brand code Operate the Cable BoxTurn on the DBS receiver using its Remote Set the DBS receiver brand codeOperate the DBS receiver JVC Dish NetworkMode Set Access the Mode Set screenSelect the mode Select the mode settingWhen this function is set to on 72 EN Display panelVHS Mode SET While timer-recording in SP mode 74 ENFor Example Channel not in useCorrection to the luminance signal to enhance details Selecting either HI-FI L or HI-FI RNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played backEnables Audio Dubbing later 76 ENOriginal recorded sound Audio-dubbed soundIndicator off Remote won’t function Batteries are dischargedConsult your JVC dealer Message appears on the screen78 EN VHS deck DV deck80 EN Playback 82 EN Instant Timer Recording ITR Timer Warning DisplayGuide Channel Number Set Recording Resume FunctionHOW to Locate Your JVC Service Center 84 ENWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 31.07 Kb
Top Page Image Contents