JVC hr-dvs3u manual 40 EN, Pressing A. Monitor changes the soundtrack as follows

Page 40

40 EN

PLAYBACK/RECORDING ON DV DECK (cont.)

1

3

2

T

W

1 2 3

2

4 5 6

7 8 9

04

1				DV				S-VHS

Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, make sure the VCR is in the Stop mode.

a- For Automatic Start Of Playback

Press REW (3), then press PLAY (4) within 2 seconds.

b- For Automatic Power Off

Press REW (3), then press POWER within 2 seconds.

c- For Automatic Cassette Ejection After Tape Rewind Press REW (3), then press EJECT () within

2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set to “ON” ( pg. 71) and if any timer programing has been made. If “AUTO TIMER” is set to “ON”, the VCR directly goes into the Timer-Standby mode at the same time when the POWER is pressed for the Automatic Power Off.

Soundtrack Selection

Your VCR is capable of recording two soundtracks (L and R) and will play back the one you select.

During Playback

Pressing A. MONITOR changes the soundtrack as follows:

	TRACK	USE

	On-Screen Display
	On-Screen Display

		Both sounds on the left channel and
	L+R	the right channel are mixed and
		played back

	L	Sound on the left channel is played
	L	back
		back

	R	Sound on the right channel is
	R	played back
		played back

NOTE:

“SUPERIMPOSE” must be set to “ON” or the on-screen displays will not appear ( pg. 71).

Image 40

Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel How To Use Remote10 EN ON-SCREEN Display for VHS deckTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Check the contents Connect the VCR to power source12 EN Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionPerform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 14 ENLanguage Access the Clock Set screen Clock Set16 EN PreparationsSemiauto Clock Set Manual Clock SetAccess the Tuner Set screen Tuner Set18 EN Auto Channel SetAccess the Manual Channel Set screen Manual Channel SetAdd or skip the desired channels To add channelsInstalling Controller 20 ENAccess the Cable Box Set screen Turn on the cable boxSelect the cable box’s channel If you do not use a cable box, press rt until OFF22 EN Enter the cable box’s brandPress OK or e If the cable box’s channel does not change toIf your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver DBS receiverSetting DBS receivers brand and channel Access the DBS Receiver Set screen24 EN Turn on the DBS receiverEnter the DBS receiver’s brand Access the DBS Receiver Brand Set screenJVC Dish Network Echostar Dish Network 26 EN Basic PlaybackVHS deck Choose a program Set the tape speedStart recording Pause/Resume recording28 EN Slow Motion On the VCRActivate frame-by-frame playback Push the Advanced JOG dial Press PauseVariable Speed Search On the Remote Slow Motion On the RemoteForward 30 EN Index SearchRepeat Playback Next Function MemoryAdjust the tracking manually Manual TrackingSoundtrack Selection Override automatic tracking32 EN Instant Timer Recording ITRRecord One Program While Watching Another Reset the counter Press C.RESET before starting recording or playbackElapsed Recording Time Indication Tape Remaining TimeRetake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording 36 EN DV deckSelect the DV deck Press DVDV recording indicator lights on the VCR DV recording indicator turns off38 EN Step 40 EN Pressing A. Monitor changes the soundtrack as followsRight channel are mixed Sound on the right channel isTime Code Access the PlusCode No. screen Access the VCR Plus+ Program screen42 EN Select the deckEngage the VCR’s timer mode For the VHS deckFor the DV deck Cable Box or DBS Receiver UsersAccess the Guide Channel Set screen Cable Box Control Setting pg44 EN Guide Channel Number SetGuide Channel Number Enter the receiving channel position numberExpress Timer Programing 46 ENEnter the program date Enter the channel positionPress DATE+ Press CH+Enter the program mode 24HR Quick Programing48 EN Set the program start/stop time and channelPage To cancel or change a program 50 ENWhen programs overlap each other Cancel or change program settingConfirm the overlapping programs Select the program to modifyTape Dubbing 52 ENFrom DV to VHS Dubbing An Entire CassetteFrom VHS to DV Dubbing direction indicator S-VHS lightsPress DV, then press SP/LP p 54 EN Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingLocate the start point on the VHS deck VHS playback indicator and DV recording indicator lightPrepare the DV deck for dubbing Edit From a Camcorder 56 ENRecorder Video input PlayerSet the input mode of recording deck 58 ENStart the source player Start the recording deckConnection to another VCR Connection to a PC with DV connectorAdvantages of S-VHS video recorders Audio Dubbing 60 ENVHS Audio Dubbing DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing 62 ENVHS Insert Editing Source tape Recording tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start EditingAccess the R.A.Edit screen 64 ENProgram Editing Memory 8 programs x 8 scenes Select the programLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingRemote A/B Code Switching Set the remote control code for RemoteCheck the remote control code for VCR 66 ENSet the TV brand code Operate the TVBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keysPress the corresponding button Power 68 ENSet the Cable Box brand code Operate the Cable BoxTurn on the DBS receiver using its Remote Set the DBS receiver brand codeOperate the DBS receiver JVC Dish NetworkMode Set Access the Mode Set screenSelect the mode Select the mode settingWhen this function is set to on 72 EN Display panelVHS Mode SET While timer-recording in SP mode 74 ENFor Example Channel not in useCorrection to the luminance signal to enhance details Selecting either HI-FI L or HI-FI RNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played backEnables Audio Dubbing later 76 ENOriginal recorded sound Audio-dubbed soundIndicator off Remote won’t function Batteries are dischargedConsult your JVC dealer Message appears on the screen78 EN VHS deck DV deck80 EN Playback 82 EN Instant Timer Recording ITR Timer Warning DisplayGuide Channel Number Set Recording Resume FunctionHOW to Locate Your JVC Service Center 84 ENWarranty Only in U.S.A 86 EN

Related manuals

Manual 88 pages 31.07 Kb