JVC hr-dvs3u manual DV deck, Time Code

Page 41

EN 41

Recording Features

(DV deck)

1

3

2

T

W

1 2 3

2

4 5 6

7 8 9

04

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording (in the right column) or timer recording

( pg. 42, 46, 48), the recording will resume automatically when power is restored to the VCR unless the VCR’s memory backup has expired.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, set its erase protection switch to “SAVE”. To record on it later, set the switch to “REC”.

Erase protection switch

Second Audio Recording

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”. ( pg. 71)

NOTES:

When the channel is changed on the VCR;

●The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

●The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP broadcast.

●Both indicators appear when a stereo program is accompanied by SAP sound.

Record One Program While Watching Another

Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The program selected with the TV’s channel controls appears on the TV screen, while the one selected with the VCR’s CH buttons is recorded on the tape.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 2 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished.

1Start recording.

Press REC (7) on the VCR.

2Engage the ITR mode.

Press REC (7) again. “o” blinks and “0:30” appears on the front display panel.

3Set the recording duration.

If you want to record for more than 30 minutes, press REC (7) to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the REC (7) button on the VCR’s front panel.

Time Code

During recording, a time code is recorded on the tape. This time code is used to confirm the position on the tape when playing back or editing a tape. To perform Random Assemble Editing ( pg. 64), time code is necessary.

Press DISPLAY/OSD until the time code on the tape appears on the front display panel.

●By pressing the DISPLAY/OSD button, you can change the display to show the time code, channel position*, clock time.

* Channel position is not displayed during playback.

NOTES:

The presence of a blank (unrecorded) portion in the middle of a tape can result in misoperation.

A “blank portion” of a tape is a section where nothing is recorded on the tape. If you start recording in a blank portion of a tape, the time codes will start from “0:00:00” again. If identical time codes are recorded in two different places on a tape, Random Assemble Editing and other similar functions might not operate properly.

In the following cases, you should play back the tape and confirm where a scene ends, and then begin recording from there:

●When starting recording in the middle of a tape on which a recording has already been made.

●When you finish recording on a tape, then played back that recording in order to check it, and now wish to continue recording.

●When you lost power or the batteries died while you were recording with a camcorder.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View Rear View Front Display Panel Remote How To UseON-SCREEN Display for VHS deck 10 ENTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Connect the VCR to power source Check the contents12 EN Situate the VCRVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 14 ENLanguage Clock Set Access the Clock Set screen16 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen18 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels20 EN Installing ControllerTurn on the cable box Access the Cable Box Set screenSelect the cable box’s channel If you do not use a cable box, press rt until OFFEnter the cable box’s brand 22 ENPress OK or e If the cable box’s channel does not change toHow to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver DBS receiverAccess the DBS Receiver Set screen Setting DBS receivers brand and channel24 EN Turn on the DBS receiverJVC Dish Network Echostar Dish Network Access the DBS Receiver Brand Set screenEnter the DBS receiver’s brand VHS deck Basic Playback26 EN Set the tape speed Choose a programStart recording Pause/Resume recordingSlow Motion On the VCR 28 ENActivate frame-by-frame playback Push the Advanced JOG dial Press PauseForward Slow Motion On the RemoteVariable Speed Search On the Remote Index Search 30 ENRepeat Playback Next Function MemoryManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic trackingRecord One Program While Watching Another Instant Timer Recording ITR32 EN Press C.RESET before starting recording or playback Reset the counterElapsed Recording Time Indication Tape Remaining TimeSecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback DV deck 36 ENSelect the DV deck Press DVDV recording indicator turns off DV recording indicator lights on the VCR38 EN Step Pressing A. Monitor changes the soundtrack as follows 40 ENRight channel are mixed Sound on the right channel isTime Code Access the VCR Plus+ Program screen Access the PlusCode No. screen42 EN Select the deckFor the VHS deck Engage the VCR’s timer modeFor the DV deck Cable Box or DBS Receiver UsersCable Box Control Setting  pg Access the Guide Channel Set screen44 EN Guide Channel Number SetEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingEnter the channel position Enter the program datePress DATE+ Press CH+24HR Quick Programing Enter the program mode48 EN Set the program start/stop time and channelPage 50 EN To cancel or change a programCancel or change program setting When programs overlap each otherConfirm the overlapping programs Select the program to modify52 EN Tape DubbingFrom DV to VHS Dubbing An Entire CassettePress DV, then press SP/LP p Dubbing direction indicator S-VHS lightsFrom VHS to DV Locate the start point on the DV deck 54 ENPrepare the VHS deck for dubbing Pause dubbingPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck 56 EN Edit From a CamcorderPlayer Recorder Video input58 EN Set the input mode of recording deckStart the source player Start the recording deckAdvantages of S-VHS video recorders Connection to a PC with DV connectorConnection to another VCR 60 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing 62 EN Insert EditingVHS Insert Editing Source tape Recording tapeAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing64 EN Access the R.A.Edit screenProgram Editing Memory 8 programs x 8 scenes Select the programPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code for Remote Remote A/B Code SwitchingCheck the remote control code for VCR 66 ENOperate the TV Set the TV brand codeBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keys68 EN Press the corresponding button PowerSet the Cable Box brand code Operate the Cable BoxSet the DBS receiver brand code Turn on the DBS receiver using its RemoteOperate the DBS receiver JVC Dish NetworkAccess the Mode Set screen Mode SetSelect the mode Select the mode settingWhen this function is set to on Display panel 72 ENVHS Mode SET 74 EN While timer-recording in SP modeFor Example Channel not in useSelecting either HI-FI L or HI-FI R Correction to the luminance signal to enhance detailsNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played back76 EN Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundRemote won’t function Batteries are discharged Indicator offConsult your JVC dealer Message appears on the screen78 EN DV deck VHS deck80 EN Playback 82 EN Timer Warning Display Instant Timer Recording ITRGuide Channel Number Set Recording Resume Function84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 31.07 Kb
Top Page Image Contents