JVC hr-dvs3u manual Engage the VCR’s timer mode, For the VHS deck, For the DV deck

Page 43

EN 43

GSet the tape speed.

For the VHS deck

Press SP/EP (p).

For the DV deck

Press SP/LP (p).

HReturn to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears on the TV screen, see page 51.

●Repeat steps 3 – 8 for each additional program.

IEngage the VCR’s timer mode.

Press TIMER. The VCR turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press TIMER again.

Cable Box or DBS Receiver Users

To timer-record a cable or satellite broadcast using the VCR plus+ system:

APerform “Cable Box Control Setting” ( pg. 20) or “DBS Receiver Control Setting” ( pg. 23).

BPerform steps 1 – 9.

CLeave the power of cable box or DBS receiver on.

IMPORTANT

If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the VCR Plus+ program screen in step 6. When this happens, set the correct Guide Channel number for that station. ( pg. 44, “Changing VCR Plus+® Setting”)

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– in step 6. You can compensate for anticipated program schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . in step 6, press WEEKLY (number key “9”) for weekly serials or DAILY (M–F) (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●In case of a power failure after programing, the VCR’s memory backup keeps your selections for approximately 10 minutes.

●You can program each deck to timer-record as many as 6 programs. If you try to program the VCR to record a seventh, “PROGRAM FULL” appears on the TV screen. To record the

extra program, you must first cancel any unnecessary programs ( pg. 50).

●It is not possible to timer-record the same program on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

ATTENTION

Guide Channel Number Set

“GUIDE CHANNEL SET” appears after performing step 6 if the Guide Channel number for the PlusCode number you entered has not been set.

If you want to set the Guide Channel number for the TV or cable station, press number keys or rtto input the channel position number on which your VCR or cable box receives that station, then press OK or e to set the Guide Channel number. VCR Plus+ Program screen appears.

If you receive your channels with a cable box and if you have properly set your Controller, “CABLE CH” appears in place of “VCR CH”. If not, refer to pages 20.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesCleaning Damage Requiring ServiceContents Front View Rear View Front Display Panel Remote How To UsePress DISPLAY/OSD 10 ENON-SCREEN Display for VHS deck To recall an indicationON-SCREEN Display for DV deck Situate the VCR Check the contentsConnect the VCR to power source 12 ENVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectors14 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play SetLanguage Preparations Access the Clock Set screenClock Set 16 ENManual Clock Set Semiauto Clock SetAuto Channel Set Access the Tuner Set screenTuner Set 18 ENTo add channels Access the Manual Channel Set screenManual Channel Set Add or skip the desired channels20 EN Installing ControllerIf you do not use a cable box, press rt until OFF Access the Cable Box Set screenTurn on the cable box Select the cable box’s channelIf the cable box’s channel does not change to 22 ENEnter the cable box’s brand Press OK or eDBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver DBS receiverTurn on the DBS receiver Setting DBS receivers brand and channelAccess the DBS Receiver Set screen 24 ENEnter the DBS receiver’s brand Access the DBS Receiver Brand Set screenJVC Dish Network Echostar Dish Network 26 EN Basic PlaybackVHS deck Pause/Resume recording Choose a programSet the tape speed Start recordingPush the Advanced JOG dial Press Pause 28 ENSlow Motion On the VCR Activate frame-by-frame playbackVariable Speed Search On the Remote Slow Motion On the RemoteForward Next Function Memory 30 ENIndex Search Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection32 EN Instant Timer Recording ITRRecord One Program While Watching Another Tape Remaining Time Reset the counterPress C.RESET before starting recording or playback Elapsed Recording Time IndicationRetake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording Press DV 36 ENDV deck Select the DV deckDV recording indicator turns off DV recording indicator lights on the VCR38 EN Step Sound on the right channel is 40 ENPressing A. Monitor changes the soundtrack as follows Right channel are mixedTime Code Select the deck Access the PlusCode No. screenAccess the VCR Plus+ Program screen 42 ENCable Box or DBS Receiver Users Engage the VCR’s timer modeFor the VHS deck For the DV deckGuide Channel Number Set Access the Guide Channel Set screenCable Box Control Setting  pg 44 ENEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingPress CH+ Enter the program dateEnter the channel position Press DATE+Set the program start/stop time and channel Enter the program mode24HR Quick Programing 48 ENPage 50 EN To cancel or change a programSelect the program to modify When programs overlap each otherCancel or change program setting Confirm the overlapping programsDubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSFrom VHS to DV Dubbing direction indicator S-VHS lightsPress DV, then press SP/LP p Pause dubbing 54 ENLocate the start point on the DV deck Prepare the VHS deck for dubbingLocate the start point on the VHS deck VHS playback indicator and DV recording indicator lightPrepare the DV deck for dubbing 56 EN Edit From a CamcorderPlayer Recorder Video inputStart the recording deck Set the input mode of recording deck58 EN Start the source playerConnection to another VCR Connection to a PC with DV connectorAdvantages of S-VHS video recorders DV Audio Dubbing Audio Dubbing60 EN VHS Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Source tape Recording tape Insert Editing62 EN VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteSelect the program Access the R.A.Edit screen64 EN Program Editing Memory 8 programs x 8 scenesEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble Editing66 EN Remote A/B Code SwitchingSet the remote control code for Remote Check the remote control code for VCRTV CH +/-,TV VOL+/-, TV Muting, number keys Set the TV brand codeOperate the TV Before performing the following stepsOperate the Cable Box Press the corresponding button Power68 EN Set the Cable Box brand codeJVC Dish Network Turn on the DBS receiver using its RemoteSet the DBS receiver brand code Operate the DBS receiverSelect the mode setting Mode SetAccess the Mode Set screen Select the modeWhen this function is set to on Display panel 72 ENVHS Mode SET Channel not in use While timer-recording in SP mode74 EN For ExampleSound on the left Hi-Fi channel is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Normally select this. Hi-Fi sound is played backAudio-dubbed sound Enables Audio Dubbing later76 EN Original recorded soundMessage appears on the screen Indicator offRemote won’t function Batteries are discharged Consult your JVC dealer78 EN DV deck VHS deck80 EN Playback 82 EN Recording Resume Function Instant Timer Recording ITRTimer Warning Display Guide Channel Number Set84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN
Related manuals
Manual 88 pages 31.07 Kb
Top Page Image Contents