JVC HR-DD865EK setup guide Timer Warning, PDC Recording

Page 15

 

SET TAPE SPEED

4 Press SP/LP ( ) to set the tape speed.

5

SET PDC MODE

Press PDC to select "ON" or "OFF".

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, PDC is set to ON.

 

If "VPS/PDC OFF" is displayed on the screen or "VPS/

 

PDC" is not lit on the display panel, PDC is set to OFF.

 

☞ "PDC Recording" in the column below.

 

● VPS (Video Programme System) recording is not

 

currently available in the U.K. and not possible with

 

this recorder.

 

RETURN TO NORMAL SCREEN

 

Press PROG or OK. "PROGRAM COMPLETED" appears

15

Satellite Receiver Users

To timer-record a satellite broadcast using VIDEO Plus+: 1 Perform steps 1 – 7.

2 Set the satellite receiver to the appropriate channel before the selected programme begins.

3 Leave the satellite receiver's power on.

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the PlusCode number you entered has not been set.

● Press the NUMBER keys or %Þ to input the preset position number on which your recorder receives that station, then press OK or # to set the Guide Program Number. The VIDEO Plus+ Program screen appears.

 

on the screen for about 5 seconds, then normal screen

6 appears.

 

● Repeat steps 1 – 6 for each additional programme.

 

 

 

ENGAGE RECORDER’S TIMER

7

MODE

Press ä (TIMER). The recorder turns off automatically

and ä appears on the display panel.

 

● To disengage the timer, press ä (TIMER) again.

GUIDE PROG SET

GUIDE PROG

TV PROG

2

– –

[5°] =

 

[PROG] : EXIT

 

(Ex.) To timer-record a BBC2 programme with VIDEO Plus+.

*If your recorder receives BBC2 on the preset position 2, press OK or #after entering "2".

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– in step 3. You can compensate for

anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . in step 3, press WEEKLY (NUMBER key “9”) for weekly

serials or DAILY (NUMBER key “8”) for daily serials (Monday

– Friday). Either "WEEKLY" or "DAILY" appears on the screen.

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on the screen to tell you that the recording is due to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

Pressing the button again makes the corresponding indication

disappear.

● You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen and "FULL"

appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary

programmes (☞ pg. 18).

● It is not possible to timer-record a TV programme with a

PlusCode number which starts with "0".

NOTES:

●The warning only appears if you’re not in the Timer mode at the time.

●If this recorder is being used as the player for tape dubbing, the warning screen will be recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .

PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times which you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service only in a very few areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest information. If the channel you intend to record does not offer a PDC service your recorder will not start recording if PDC has been selected. Be sure to set PDC to "OFF" if PDC is not available on your selected channel (☞ step 5 above).

NOTES:

●PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 IN/DECODER on your recorder.

●PDC recording is also possible via the AV1 IN/OUT connector.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents HR-DD865EK Do not place the recorder Safety PrecautionsSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide TV Aerial Cable not provided To connect to a TV with 21-pin AV input connector ScartAV input connector Scart Back of TVGo to item If you have connected the video recorder toYour TV via both an RF cable and a 21-pin BeginningEndLink screen will appear. Then the Guide Remote control while downloading isPress OK to exit Video Channel Set mode 8 or If -- appears on the display panel, referIf auto channel set has succeeded but auto clock set has not NexTView Link TV Auto Power OnLink Functions Turn on the RecorderStart Playback PlaybackLoad a Cassette PointHigh-Speed Turbo Search Activate HIGH-SPEED SearchStill Picture/Frame-By-Frame Playback Slow MotionRecording SET Counter Display Select Preset to WatchReset Counter Engage ITR ModeVideo Plus+ Timer Programming PDC Recording Timer WarningTime Express Timer ProgrammingBefore performing Express Timer Programming Enter Programme Start TimeScreen SET PDC ModeTimer Mode Return to NormalCheck, Cancel And Replace Programmes SET Mode Adjust TrackingAccess Main Menu Screen Access Mode SET ScreenS.T. Picture System Playback/ Recording According To Tape Charac- teristicsRecording PlaybackOr press Record on the recorder Sections Looking For Scene You WantActivate Index Search Skip Over UnwantedActivate Instant ReviewInstant ReView VisibleNoiseless TimeScanVariable-Speed Search/ Reverse Play Normal recorderTimeScan Speed SP Speed LP Audio outputMove the highlight bar pointer to Time Scan Audio Hi-Fi Audio Recording Level Control Access Main MenuSelecting Sound You Want Control ScreenReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionType of Broadcast On-screen Display Being Received Aerial Aerial connectorAutomatic Satellite Programme Recording Satellite Receiver UnitMove the highlight bar pointer to AV2 SELECT, by Move the highlight bar pointer to Mode SET byBefore performing the following steps Pressing %Þ, then press OK or #Remote Con- trol Functions SET Remote ControlRE-SUPPLY Power Remote A/B Code SwitchingOperate TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeSatellite Receiver Multi- Brand Remote Control Operate Satellite ReceiverTV Prog +/-,NUMBER keys Edit From Camcorder Connector Synchro EditingRepeat steps 4 6 as necessary Start Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SAV2 Select Setting Start Dubbing SET Input ModeLocate Start Point Engage Audio DubbingReset the Counter Insert EditingLocate END Point Engage Insert Editing Start EditingEND Insert Editing Press OK or Terminal JLIPJoint Level Interface Protocol ConnectorInformation On J Terminal TerminalON-SCREEN Display Access Mode SETENABLE/DISABLE Other FunctionsPower SAVE, then press Power Save ModeAuto SP→LP Timer Auto TimerNext Function Memory Retake Engage RECORD-PAUSE ModeResume Recording Repeat PlaybackAudio Cable not provided Speaker Connection To Stereo SystemSET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith RF Connection Test SignalTuner Set Perform Auto Channel SETAuto Channel Set For about 5 seconds, a Screen preset positionsAfter Scan Completed Is displayed on the screenStoring Channels Manually Change Station Preset Position Fine-Tuning Channels Already StoredDelete a Channel Select NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List Channel Islands TV Station Channel Number GuideJust Clock Clock SetVideo Plus+ Setup NumberGuide Program Number Set Playback Questions And AnswersTroubleshooting Won’t stop Timer RecordingFront View IndexRear View Remote Control How To Use Remote Control LCDMaximum recording time DA4 Double Azimuth helicalVHF 44.5 143/143 470 MHz
Top Page Image Contents