JVC HR-DD865EK setup guide SET Input Mode, Locate Start Point, Engage Audio Dubbing, Start Dubbing

Page 37

Audio Dubbing

37

Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack.

Normal audio track

Pre-recorded tape

PAUSE

TV

PROG

PLAY

STOP

.DUB A

Video/Hi-Fi audio track

Audio-dubbed tape

MAKE CONNECTIONS

1 Connect an audio component to the AUDIO L + R connectors on the recorder's front panel.

●When connecting monaural equipment, use only the recorder's AUDIO L connector.

CD Player etc.

 

CD Player etc.

Mixer

Audio mixer

output

 

 

Original sound

 

AUDIO OUT

NOTES:

●When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound (Hi-Fi + Normal soundtracks), press

AUDIO on the remote control to select " + (L+R) + NORM" (☞ pg. 27).

●Audio dubbing stops automatically when the counter reaches "0:00:00", and the recorder enters the Play mode. Check the counter reading before dubbing.

●Audio dubbing is also possible using the rear panel AV1 IN/OUT or AV2 IN/DECODER connector. When using these connectors, make sure to select the correct input mode in step 2.

●Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.

●When playing back an audio-dubbed tape, press AUDIO on the remote control to select the soundtrack you wish to hear (☞ pg. 27).

2

SET INPUT MODE

Press NUMBER key "0" and/or TV PROG so that "F-1" or

"S-1" appears in place of a channel number.

 

LOCATE START POINT

 

Press PLAY to start playback of the tape in your

 

recorder, and press PAUSE when you find the point

3 where you want to start dubbing.

4

ENGAGE AUDIO DUBBING

Press A. DUB.

 

● It is possible to take the original sound recorded on

the tape in your recorder and mix it with other

 

sounds from a microphone, CD player etc. To

 

perform this audio dubbing with audio mixing,

 

connect as in the diagram on the left.

 

● Your recorder enters the Audio Dubbing Pause mode.

 

(" " blinks, " " and " " light up on the front display

 

panel.)

 

● To perform audio dubbing with audio mixing, press

 

AUDIO on the remote control to select " + (L+R)"

 

at this point.

 

* Audio dubbing with audio mixing is not possible if

 

you're using a monaural audio component, or if

 

you don't have an audio mixer.

 

 

 

START DUBBING

 

Engage the audio component's Play mode, then press

 

PLAY to start the tape in your recorder. Audio dubbing

5 begins at this point.

●"" blinks and "" is displayed on the front display panel.

●To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.

END AUDIO DUBBING

6 Press STOP to stop the tape in your recorder, and engage the audio component's Stop mode.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HR-DD865EK Do not place the recorder Safety PrecautionsSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide AV input connector Scart To connect to a TV with 21-pin AV input connector ScartBack of TV TV Aerial Cable not providedYour TV via both an RF cable and a 21-pin If you have connected the video recorder toBeginningEnd Go to itemPress OK to exit Video Channel Set mode Remote control while downloading is8 or If -- appears on the display panel, refer Link screen will appear. Then the GuideIf auto channel set has succeeded but auto clock set has not Link Functions TV Auto Power OnTurn on the Recorder NexTView LinkLoad a Cassette PlaybackPoint Start PlaybackStill Picture/Frame-By-Frame Playback Activate HIGH-SPEED SearchSlow Motion High-Speed Turbo SearchRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming PDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingEnter Programme Start Time TimeTimer Mode SET PDC ModeReturn to Normal ScreenCheck, Cancel And Replace Programmes Access Main Menu Screen Adjust TrackingAccess Mode SET Screen SET ModeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsPlayback RecordingOr press Record on the recorder Activate Index Search Looking For Scene You WantSkip Over Unwanted SectionsReview Activate InstantInstant ReView Variable-Speed Search/ Reverse Play TimeScanNormal recorder VisibleNoiselessSpeed SP Speed LP Audio output TimeScanMove the highlight bar pointer to Time Scan Audio Selecting Sound You Want Access Main MenuControl Screen Hi-Fi Audio Recording Level ControlSoundtrack Selection Receiving Nicam Stereo And Bilingual ProgrammesType of Broadcast On-screen Display Being Received Automatic Satellite Programme Recording Aerial connectorSatellite Receiver Unit AerialBefore performing the following steps Move the highlight bar pointer to Mode SET byPressing %Þ, then press OK or # Move the highlight bar pointer to AV2 SELECT, byRE-SUPPLY Power SET Remote ControlRemote A/B Code Switching Remote Con- trol FunctionsControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVOperate Satellite Receiver Satellite Receiver Multi- Brand Remote ControlTV Prog +/-,NUMBER keys Edit From Camcorder Synchro Editing ConnectorRepeat steps 4 6 as necessary Edit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 Select Setting Locate Start Point SET Input ModeEngage Audio Dubbing Start DubbingInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing Information On J Terminal Terminal JLIPJoint Level Interface Protocol ConnectorTerminal Press OK orENABLE/DISABLE Access Mode SETOther Functions ON-SCREEN DisplayPower SAVE, then press Power Save ModeAuto Timer Auto SP→LP TimerNext Function Memory Resume Recording Engage RECORD-PAUSE ModeRepeat Playback RetakeAudio Cable not provided Speaker Connection To Stereo SystemExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Test SignalPerform Auto Channel SET Tuner SetAuto Channel Set After Scan Completed Screen preset positionsIs displayed on the screen For about 5 seconds, aStoring Channels Manually Fine-Tuning Channels Already Stored Change Station Preset PositionDelete a Channel Switch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Channel Islands TV Station Channel Number GuideJust Clock Clock SetNumber Video Plus+ SetupGuide Program Number Set Playback Questions And AnswersTroubleshooting Won’t stop Timer RecordingFront View IndexRear View Remote Control How To Use Remote Control LCDDA4 Double Azimuth helical Maximum recording timeVHF 44.5 143/143 470 MHz
Top Page Image Contents