Filename
|
16 EN |
| INITIAL SETTINGS | |
Plug & Play | This VCR sets the clock and tuner channels automatically | ||
when AC power cord is first connected to an AC outlet. The | |||
Setting | antenna cable must be connected for the Plug & Play setting. | ||
setting data transmitted from one of the regular TV | |||
| The time and date can be set automatically by the clock | ||
Auto Clock Set/Auto Tuner Set | broadcast channels. We call this TV channel the host | ||
channel and it is a PBS channel in your area. | |||
|
| ||
| A | Perform Plug & Play setup | |
ATTENTION: | |||
| Connect the antenna cable to the VCR | ||
• If you use a cable box, Plug & Play will not function; set |
| ||
| (A page 13). Then connect the AC power cord | ||
the clock and tuner channels separately. (A page 17 - 21) |
| ||
• It takes several minutes for the VCR to complete the Plug & |
| to an AC outlet. Do not turn on the VCR. | |
Play setting. |
| The clock and tuner channels will be set automatically. | |
•Do not press any buttons on the front panel or on the
Remote while Plug & Play is in progress. | NOTES: |
| • When AC cord is connected to an AC outlet, |
| [LOADING] appears on the front display panel. It |
| takes some time until VCR completes its setup. |
| • Auto Clock Set is performed first. |
| [AUTO] blinks on the front display panel during Auto |
| Clock Set. |
| • Auto Channel Set is performed next. Auto Channel Set |
| scans all the channels that are receivable by your |
| VCR. During Auto Channel Set, the channel numbers |
| are displayed as they are scanned and set. |
| • When Plug & Play setting has been complete |
| successfully, the correct clock time is displayed. If you |
| perform Plug & Play setting successfully, there is no need |
| to perform the clock (A page 17) and tuner (A page |
| 20) settings. If, however, you want to add or delete |
| channels, refer to Manual Channel Set on page 21. |
CH
During Initial Auto Clock Set
[AUTO] blinks.
During Auto Channel Set
The channel numbers are displayed as they are scanned and set.
Plug & Play Completed
The current time is displayed. ([PM] lights up during the afternoon.)
* If an incorrect clock time or [–
INFORMATION
•If “AUTO CLOCK” is set to “ON” on the Clock Set screen on page 17, the clock will be adjusted automatically by the host channel every hour (except 11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the VCR is turned off. The clock will be adjusted just on these hours — on the time displayed on the front display panel, not on the actual real time.) The default setting of “AUTO CLOCK” is “ON”.
•If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Auto Clock Set will be performed when power is restored to the VCR.
•Poor antenna or cable signal may prevent the VCR from receiving the Auto clock setting data from a PBS channel. If this function is taking a considerable amount of time, it may be necessary to perform the Semiauto (A page 18) or Manual Clock Set (A page 19) procedure.
What to do if Plug & Play setting failed
•If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the Semiauto (A page 18) or Manual Clock Set (A page 19) procedure.
•If [–
If Plug & Play setting is not performed though the antenna cable is connected correctly, perform Manual Clock Set (A page 19) and Auto Channel Set or Manual Channel Set (A page 20 or 21).