Filename
|
50 EN | TIMER RECORDING (cont.) |
ATTENTION:
•If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1 : The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
| Not | |
|
|
|
|
|
|
| |
Program 2 |
|
| CH40 |
|
|
| recorded |
|
|
|
| ||||
Pattern 2 : The program starting earlier will be recorded.
10:00 | 11:00 | 12:00 |
Program 1
Program 2 CH40 
Not recorded
Pattern 3 : The program starting earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 | |
Not recorded
•When using i.LINK Timer Programming or Video Remote Control Timer Programming, if the program stop time of the Integrated HDTV (or Digital Set Top Box) coincides with the program start time of the VCR or vice versa, only the parts shown below in gray will be recorded.
10:00 | 11:00 |
| ||
Program 1 | Integrated HDTV |
|
| |
Program 2 |
|
|
|
|
|
| This VCR | ||
|
|
|
|
|
|
|
| Not recorded | |
10:00 | 11:00 |
| ||
Program 1 |
|
|
| |
| Integrated HDTV | |||
Program 2 |
|
|
|
|
| This VCR |
|
| |
| Not recorded | |||
|
|
| ||
NOTES:
•During timer programming, try to set an interval of more than 1 minute between the program stop time of Program 1 and the program start time of Program 2 or vice versa.
•For the timer programming method, refer to the manual of the Integrated HDTV (or Digital Set Top Box).
Other Useful functions for timer recording
You can also use the following functions for timer recording.
•“AUTO TIMER” (A page 66)
When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press [TIMER (j)] to engage or disengage the timer recording standby mode.
•“AUTO SP N EP TIMER” (S-VHS/VHS only) (A page 66)
If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.