Filename
|
18 EN | INITIAL SETTINGS (cont.) |
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. /time zone setting manually.
First follow steps A to B on page 17, then go to the following steps.
C Access Auto Clock Set screen
E Select D.S.T. mode
You have three choices:
“AUTO”– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)
“ON”– Adjustment will be made by the built- in clock itself.
“OFF”– Select when Daylight Saving Time does not apply to you.
Press [FG] to move the arrow to “AUTO CLOCK SET”, then press [OK].
FUNCTION SET UP |
| TUNER SET UP | INITIAL SET UP | ||
CLOCK SET |
|
| GUIDE CHANNEL | OTHER | |
AUTO CLOCK SET |
|
| |||
MANUAL CLOCK SET |
|
| |||
AUTO CLOCK |
| ON | |||
MENU | OK |
| SELECT WITH ARROW KEYS | ||
EXIT | SELECT | THEN PRESS [OK] | |||
|
|
| |||
Press [FG] to move the arrow to “D.S.T.”, then press [D E] repeatedly until the desired setting is selected.
F Select time zone
Press [FG] to move the arrow to “TIME ZONE”, press [D E] repeatedly until “AUTO” or the
Then;
To select the host channel — go to step D. To select the D.S.T. mode — go to step E. To select the time zone — go to step F.
NOTE:
The time set previously will be erased when “AUTO CLOCK SET” is selected.
desired time zone is selected.
Each time you press the button, the time zone changes as follows:
U“AUTO” U “ATLANTIC” U “EASTERN”
U “CENTRAL” U “MOUNTAIN” U “PACIFIC” U “ALASKA” U “HAWAII” U (back to the beginning)
D Select host channel
NOTE:
If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a
You can either select “AUTO” or enter a PBS channel number. Press [FG] to move the arrow to “HOST CH”, then press [D E] until “AUTO” or the desired PBS channel number is selected.
FUNCTION SET UP | TUNER SET UP | INITIAL SET UP | |
AUTO CLOCK SET | TIME | : AM DATE 1/1 (THU) 2004 | |
HOST CH | [TV] | AUTO | |
D.S.T |
| AUTO | |
TIME ZONE |
| AUTO | |
RETURN |
|
| |
MENU | OK | SELECT WITH ARROW KEYS | |
EXIT | SELECT | THEN PRESS [OK] | |
|
| ||
PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step D, be sure to select the correct time zone manually.
G Return to normal screen
Press [MENU].
IMPORTANT:
NOTE:
Some PBS channels do not transmit clock setting data.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.
Turn off the VCR after performing Semiauto Clock Set. [AUTO] will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.