JVC HM-DH5U manual Enter DBS Receiver’s brand, Brand Code, As shown above

Filename [HM-DH5U_Eng.fm]

HM-DH5U_Eng.fm Page 27 Tuesday, June 1, 2004 4:09 PM Masterpage:Right-FullCol

VCR CABLE TV /DBS

EN 27

E Enter DBS Receiver’s brand

Press [FG] to move

the arrow to	FUNCTION SET UP TUNER SET UP INITIAL SET UP
	DBS SET UP
“BRAND”.		INPUT CH	OFF
Press [D E] to enter		BRAND	40
the brand code from		TEST MODE
the following list.
	MENU	OK	SELECT WITH ARROW KEYS
	EXIT	SELECT	THEN PRESS [OK]
BRAND			CODE
JVC (DISH Network)			51
ECHOSTAR (DISH Network)			51
SONY (DSS)			41
RCA (DSS)			40

	F Engage test mode
G	Press [FG] to move the arrow to “TEST MODE”,
	then press [OK].
E F	The program currently received through the DBS
	receiver appears for about 10 seconds.
	NOTE:
	If you do not engage the test mode in step F, “INPUT
	CH” and “BRAND” are not set.
	• If the DBS receiver’s channel changes to 205,
	setting is complete
	Press [D E] to	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
	move the arrow to
NOTES:		DBS SET UP
	“YES”, then press	INPUT CH		OFF
• The Controller may not work with all types of DBS receiver.	[OK] and “DBS	DID YOUR DBS RECEIVER CHANGE TO
• If your DBS receiver does not respond to the code, you cannot	RECEIVER			CHANNEL 205?
use the Controller to change satellite channels. In this case,			YES	NO
	CONTROL IS ON”
make sure to leave the DBS receiver turned on and tuned to
	appears on the		OK
the proper channel before the scheduled start time of timer		MENU		SELECT WITH ARROW KEYS
	screen for about 5	EXIT	SELECT	THEN PRESS [OK]
recording. In addition, if your DBS receiver is equipped with a
timer, you can also use ‘Satellite Auto Recording’ (A page	seconds
47).	• If the DBS receiver’s channel does not change
• The VCR can only change the satellite channel through the	as shown above
Controller during timer recording.	A Press [D E] to move the arrow to “NO”.
• If your DBS receiver cannot be operated with a Remote	B Press [OK].
(because it has no remote sensor), you cannot use the
	C Re-enter the correct code.
Controller to change its channels. Make sure to leave the DBS
receiver turned on and tuned to the proper channel before the
scheduled start time of timer recording.	G Return to normal screen
• For customers in U.S.A.: If you are unable to set the

Controller, contact JVC toll free at 1-800-252-5722.

Press [MENU].