Editing Names, Loading Partition? | MicroBoards Technology HCL-6000

MICROBOARDS TECHNOLOGY, LLC

HCL Series

To input the desired quantity, do the following:

¾Make sure the cursor is located at the first position (First blinking position):

Specify Counter: [0 ] OK?

¾Press the Down button repeatedly until “0” is displayed.

¾Press OK button once to move the cursor to the next position.

¾Press the Down button repeatedly until “0” is displayed.

¾Press OK button once to move the cursor to the next position.

¾Press the Down button repeatedly until “2” is displayed.

¾Press OK button once to move the cursor to the next position.

¾Press the Down button repeatedly until “1” is displayed.

¾Now, “0021” is displayed, press OK button once and the cursor moves to “OK”.

Then, press the OK button once to submit your counter value. The loader will now start loading disc from the input spindles and place them into all drive trays.

7.2 Editing Names

When you create either a new user or a partition, you need to assign a name to it. The example shown here shows how to name or rename a partition, but the process for naming or renaming the user name is identical.

During the process of creating a new partition, you will see the Edit Partition Name menu:

Edit Partition Name

[

] OK?

To enter the name, use the Up or Down button to select the character and use the OK or ESC button to move the cursor position. Once you've finished, move the cursor to “OK” and press the OK button.

The name for a partition can be up to eight characters long, and the characters can be any alpha (A...Z) or numeric (0...9) value. For example, if you want to name the partition for your master disc as “DVD1”, then follow this example:

¾Press the Down button repeatedly until “D” is displayed. (You can also hold the Down button down, and the autoloader will scroll through the alphabet.)