Load Partition, Rename Partition | MicroBoards Technology HCL-8000

Hard Drive Setup

2. Load Partition

Load Partition[2/16] Load -> New Partition

10.2 Load Partition

The Load Partition menu is used to load a master disc’s content into the desired partition on the Hard Drive.

Press the OK button to enter the Load Partition menu.

If you would like to load the master disc into a new partition, press the OK button when the New Partition option is shown. Or, you can use the Up or Down button to select one of the existing partitions to be overwritten & press the OK button to select it.

Depending on whether you are loading the master into a new partition, or into an existing partition, you will see one of these two screens:

New Partition

Existing Partition

Edit Partition Name

[

] OK?

Enter a new partition name as described in “Editing Names” on page 13. For this example, we will name it “Happy”.

or:

This will Overwrite [DVD1 ],OK?

Press the OK button to overwrite the partition named “DVD1”. Before continuing, the autoloader will ask you again to confirm it.

Edit Partition Name

[DVD1

] OK?

Enter a new partition name as described in “Editing Names” on page 13. For this example, we will name it “SAMPLE”.

Load Partition [SAMPLE ], OK?

The system will display a verification message before continuing. Pres the OK button to start loading the partition named “SAMPLE”.

The master should be placed on the first input spindle. The robotic arm will pick it up and place it into one of the drives, and the contents of the master disc will be loaded into the desired partition.

Load Partition OK! Press OK to Finish

Press the OK button to finish.

10.3 Rename Partition

When you load your master disc onto a hard drive partition, you are asked to give it a name. However, you can rename it at anytime afterwards. Instructions for this are shown in Editing Names on page 13.