MicroBoards Technology HCL Series, HCL-6000, HCL-8000, HCL-4000 user manual Menu Overview, Copy

Page 8

Menu Overview

This section provides an overview of the menu options. These menu options are explained in detail on the referenced pages.

Copy

page 14

Use the Copy menu or Copy quick key to make CD/DVD copies. Before you start a copy, make sure you have selected the correct Master Mode.

 

If you plan to use Single Master Mode, please make sure you have successfully loaded your master

 

disc to a partition on the Hard Drive.

 

If you plan to use Multi Master Mode, please make sure you have placed every master disc on top of

 

the corresponding number of blank discs.

 

For additional information, see Making Copies in Single Master Mode on page 14 or Making

Test

Copies in Multi Master Mode on page 16.

page 17

 

Use the Test menu to simulate the copy process. With simulation, write once recordable discs such

 

as DVD-R, or CDR will be reusable. The purpose of simulation is to ensure error free duplication.

 

Note: Due to physical limitations of the DVD+R recordable format, if you try to simulate DVD+R

 

copying, you will encounter failure messages.

Warning: If you are using CD/DVD Rewritable discs as your blank media during the simulation, the content on those discs will be permanently erased.

Compare

page 17

Use the Compare function to perform a bit-by-bit comparison between the content of your master disc(s) in the Hard Drive and the contents of all discs it copied. This ensures that all of your copies are identical to original master disc(s).

Note: The bit-by-bit comparison will only apply on all DVDs and Data CDs. The readability check will be applied for other formats like Audio CDs, CD+G, and Video CDs discs due to their lack of error correction mechanisms.

Test + Copy

page 19

Use the Test + Copy menu option to simulate the copying process initially. Then, the autoloader performs the actual copy process on the blank disc(s) that passed the simulation. For the blank disc(s) that didn’t pass the simulation, the autoloader will place it/them to the Reject Area.

Copy + Compare

page 19

Use the Copy + Compare menu option to make 100% reliable copies. After the copy process is done, the autoloader automatically compares the copies from the content of your original master disc.

Select Burn Speed

page 19

Use the Select Burn Speed menu option to adjust the duplication speed for the various blank disc formats. For additional information, see Select Burn Speed on page 19.

Select Source

page 20

Use the Select Source menu to tell the system where the content of the master disc resides during duplication. At this point, Hard Drive is the only place where the content of the master disc resides during duplication. For more information, see Select Source on page 20.

Master Mode

page 20

Use the Master Mode menu or Single Master and Multi Master quick keys to select either Single Master Mode(SM) or Multi Master Mode (MM). For more information on those modes, see Single Master and Multi Master Modes on page 11. For more information on using the Master Mode menu, see Master Mode on page 20.

Erase RW

page 20

Use the Erase RW menu to erase your Rewritable discs. There are two options:

¾Full Erase: This option erases the entire disc, destroying all previously written data in the process.

8 Menu Overview

Image 8
Contents HCL Series Introduction Table of Contents Introduction Introduction Microboards Statement Regarding Improper Duplication LCD Control Panel Layout Front Panel ControlsMenu Overview CopyRead Error Skip CD Writing ModeAutocopy Enabled DVD+R Compatibility ModeLoad Default Update FirmwareSystem Info Device InfoSingle Master Mode Multi Master Mode Batch ModeIntroduction to Manage Accounts Single Master and Multi Master ModesCounter Specify Counter Specify Counter 0 OK? Setting Counters and Assigning NamesSetting Counters Editing Names Edit Partition Name OK?Loading Partition? DVD1Making Copies in Single Master Mode Master ModeOperation Microboards B.30Pass 100 Fail Making Copies in Multi Master Mode Input Bin Empty 20 Press OK to Continue Access Log File OK?DVD Pass 16 FailHDD to CD Speed Duplication SpeedsMicroboards Copy Erase RW HDD to CD Speed Adjusted toMicroboards B.30 8. Master Mode Microboards B.30 Copy Hard Drive Setup Quick ErasingPass 25 Fail Select PartitionLoad Partition New Partition Existing PartitionRename Partition Delete PartitionPartition Size AdminPartition Info Format Hard Drive Setup Language Language English Language EspanolSetup Read Error Skip Setup Max Audio, VCD & CDG Max Audio, VCD & CDG Speed SetupSetup Startup Menu Startup Menu Copy BuzzerSetup Screen Saver Screen Saver On Screen Saver Off Setup Counter Counter On Counter OffSetup Autocopy Enabled Microboards B.30 16. Autocopy11.10 DVD+R High Compatibility Mode Setup 10.DVD+R High CompatibilityLoader Processing Please Wait Loader Processing Drive 2-Input BinInsert Disc menu CD 21M Data 1 Session 1TrkPlextor Dvdr PX716 CPURAM MB Sdram System Utilities 4. Load Default Press OK to Continue Loader Utilities 1. Drive Alignment Please Select Drive Go?Drive Alignment Alignment Finished? Alignment Next?Drive Alignment Alignment Next? Loader Utilities 3. Disc SeparatorManage Accounts 1. View User Admin Loader Utilities 4. Z form ManeuverLoader Utilities 5.Alignment Protection Microboards B.30 14.Manage Accounts Enter PWD OK?Delete User Create UserEdit User Info Password on Bootup Manage Accounts Password on BootupTroubleshooting Drives cannot read disc and shows error messageError Codes Code Short Description Full DescriptionMicroboards TECHNOLOGY, LLC Menu Tree Specifications Supported FormatsTechnical Support Actual Size 8-drive Packaged Size 8-drive