Magnavox CMWD2205 owner manual Information Troubleshooting Guide, Select Initialize

Page 23

Reset to the Default Setting (Except for PARENTAL Setting)

1

SETUP

STOP

<SETUP MENU>

SETUP

QUICK

CUSTOM

INITIALIZE

2

or

Select “INITIALIZE”.

SETUP

QUICK

CUSTOM

INITIALIZE

3

 

 

or

ENTER

 

Select “YES”.

SETUP

INITIALIZE

Initialize?

 

NO

 

YES

 

ENTER

Press twice.

4To exit the menu

SETUP

Hint

•When you cancel to initialize at step 3), select “NO”.

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.

 

PROBLEM

CORRECTIVE ACTION

D

No power.

• Make sure the power plug is connected to an AC outlet.

V

 

• Make sure the power is turned on.

D

This unit does not respond to

• Check if the power plug is connected to an AC outlet.

 

the remote control.

• Check the batteries in the remote control.

 

V

 

• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles

C

 

between the sensor and the remote control.

 

• You have to be within 23 feet of this unit.

R

 

• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever

 

you need, on the remote control.

 

 

• Check if a cassette tape is in this unit.

 

 

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then.

 

 

If you hear some signal sound from the radio in response to your pressing buttons on the remote

 

 

control, the remote control is working.

 

Poor picture or noise

• Interference signal may be received. Change the position and orientation of the unit.

 

Timer recording is impossible.

• Make sure the Timer Recording is set correctly.

V

 

• Make sure the TIMER light appears on the unit. If not, press [SUBTITLE/T-SET].

C

 

• Make sure the VCR clock is set correctly.

Cannot go into record mode.

• Make sure the tape has a safety tab. If needed, cover the hole with adhesive tape.

R

 

• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.

 

Playback picture is partially noisy.

• Adjust tracking control for a better picture by pressing [CHANNEL L/K] on the unit or [SKIP/CH.

 

 

G/K H/L] on the remote control.

 

Cannot view a tape but the

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.

 

audio is OK.

• Make sure the VCR is not in the Menu mode.

 

No, or poor, playback picture.

• Change the RF output channel to CH4. Then select the same channel on the TV.

 

 

• Fine tune your TV.

 

TV programs cannot be seen

• Re-check the ANT-IN and ANT-OUT connections. See pages 1 and 6.

 

normally.

• Press [VCR].

 

 

• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light

 

 

is lit, then set it to the TV position by pressing [VCR].

 

Video or color fades in and out when

• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

 

making a copy of a video tape.

 

 

Cannot remove the tape.

• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.

 

No picture.

• Connect the video cables firmly.

D

 

• Insert a correct video disc that plays on this unit.

 

• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.

V

 

 

Disc cannot be played.

• Insert the disc.

D

 

• Clean the disc.

 

• Place the disc correctly with the label side up.

 

 

• Cancel the parental lock or change the control levels.

 

 

• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its sur-

 

 

face.

 

No sound.

• Connect the audio cables firmly.

 

 

• Turn the power of the audio component on.

 

 

• Correct the audio output settings.

 

 

• Correct the input settings on the audio component.

 

 

 

 

No DTS audio is output.

• This unit does not support DTS audio. This is not a malfunction.

 

Distorted picture.

• Connect this unit directly to the TV.

 

 

• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

 

 

• Although pictures may stop for a moment, this is not a malfunction.

 

Audio or subtitle language

• The selected language is not available for audio or subtitles on the DVD.

 

does not match the setup.

This is not a malfunction.

 

The camera angle cannot be changed.

• The DVD does not contain sequences recorded from different camera angles. This is not a malfunction.

 

Audio or subtitle language

• The DVD does not contain audio source or subtitles in the selected language.

 

cannot be changed.

This is not a malfunction.

 

“Prohibited icon” appears on the

• That operation is prohibited by this unit or the disc.

 

screen, prohibiting an operation.

This is not a malfunction.

 

The PLAY indicator on the front

• An unacceptable disc is installed.

 

panel flashes.

Insert a playable disc.

 

 

 

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

•Playback from a desired track and random playback are not available during program playback.

•Some functions are prohibited on some discs.

Information

– 23 –

EN

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Basic TV Connection Supplied AccessoryTable of Contents Please read before using this unitMake your contribution to the environment PrecautionsPrecautions Laser SafetyImportant Safeguards Hint Unplayable Discs About the Video Cassettes and DiscsPlayable Video Cassettes Playable DiscsConnection to an Audio System Setup ConnectionsRF Output Channel Hint for Cable Box or Satellite BoxMethod Connection to a TVAfter you have completed connections Front & Rear TerminalsTo Add/Delete Channels Clock SetupPreparation for Use Turn On the Unit for the First TimeFunction Overview Front Panel IndicatorVCR/DVD Switching Lights up when the disc is insertedEither side of center Remote ControlInstalling the Batteries for the Remote Control Keep in mind the following when using the remote controlIndex Search VCR Functions PlaybackOther Operations Hints for Index Search & Time SearchRecording & OTR One Touch Recording Timer RecordingRecording Auto RepeatSelect the desired start time Hour Hints for OTR and Timer RecordingTo Check, Correct or Cancel a Timer Program Press SUBTITLE/T-SET then, VCR on the remote controlSupplied Copying a Video TapeNot supplied DVD Functions Playback On-Screen Display Search Function Marker SetupProgrammed Playback Repeat / Random / Programmed PlaybackRepeat Playback Repeat A-B PlaybackSpecial Settings Custom Menu DVD SetupQuick Setup Menu Language SettingAudio menu Display SettingAudio Setting Display menuParental Levels To Change the Password for Parental ControlsParental Setting Others SettingSelect Initialize Information Troubleshooting GuideReset to the Default Setting Except for Parental Setting Language List SpecificationsLimited Warranty Memo Connections Installing the BatteriesFor the Remote Control Quick Use GuideTo stop VCR Playback DVD/CD PlaybackAble are set to the correct channel To stop To eject PlaybackCâbles audiovisuels Accessoires fournisTable des matières Lire avant l’utilisation de l’appareilProtection de l’environnement PrécautionsSécurité concernant le laser Conserver CE Guide D’UTILISATION Les Accessoires N’utiliser que les accessoiresRecommandés par le fabricant de l’appareil. L’utilisation ’autres accessoires risque d’être dangereusePropos du copyright Emplacement d’installationConseil Éviter les risques d’électrocution et d’incendieDisques ne pouvant pas être lus Propos des disques et des cassettes vidéoCassettes vidéo lisibles Disques lisiblesRaccordement à un système audio Configuration RaccordementsChaîne de sortie RF Méthode Raccordement à un téléviseurUne fois les connexions terminées Bornes avant et arrièrePour ajouter/supprimer des chaînes ConfigurationPréparation pour utilisation Première mise sous tension de l’appareilCommutation Magnétoscope/lecteur DVD Aperçu FonctionnelIndicateurs sur le panneau frontal En ligne droite env m TélécommandeConfiguration Mise en place des piles De la télécommande Garder à l’esprit ce qui suit à l’emploi de la télécommandeConseils à propos de la recherche index et par horaire Fonctions de magnétoscope Lecture normaleAutres opérations Enregistrement et OTR enregistrement instantané Pour arrêter temporairement l’enregistrement Mode de pauseEnregistrement Répétition automatiqueDe l’enregistrement heure Conseils pour OTR et l’enregistrement avec minuterieSélectionner les minutes Sélectionner l’heure du démarrageArrière du téléviseur Copie d’une vidéocassetteMagnétoscope Fonctions de Fonctions de DVD Fonctions de DVD LectureInformations affichées à l’écran Fonction de recherche Configuration des marqueursLecture programmée Lecture à Répétition / Aléatoire / ProgramméeLecture à répétition Répétition A-BRéglages spéciaux Réglage de la Langue Configuration DVDMenu CONF. RAP Menu PersonnalMenu Affichage ConseilsRéglage de l’AFFICHAGE Réglage SONRéglage Autres Contrôle parentalChangement du mot de passe du blocage parental Réglage ParentSélectionner OUI Informations Guide de dépannageMise en réglage par défaut excepté réglage Parent Sélectionner l’optionListe des langues Caractéristiques techniquesGarantie Limitée Mémo Canal de sortie RF Guide d’utilisation rapideConnexions Allumez l’appareil pour la première foisLecture DVD/CD Lecture magnétoscope
Top Page Image Contents