JVC HR-XVC15U manual Tuner setting, TV/CATV Selection, Setting channels automatically

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

Preparation:

• Turn ON the TV and set it to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)

TV/CATV Selection

	1 Press SET UP MENU. The VCR menu screen will appear.
		Press	or	to select “CH SETUP”, then press ENTER.
	2 Press		or	to select the “TV/	CHSETUP
		CATV” option.			UTOTVCHCATVMMORY
					ADD/DELETE
					·+/–/ENTER/MENUÒ
		Then press ENTER to select the			CHSETUP
	3 TV or CATV mode. The arrow				UTOTVCHCATVMMORY
		indicates the selected mode.
		TV	- VHF/UHF channels		·+/A–DD/DELET/ENTER/MENUEÒ
		CATV - CABLE TV channels
	4 Press SET UP MENU until the menu screen is cleared.
	Setting channels automatically
	The VCR can receive a maximum of 181 channels by
	presetting the channels into memory.				CHSETUP
	1	Repeat above step 1 and press
		or	to select “AUTO CH		UTOTVCHCATVMMORY
		MEMORY”.			ADD/DELETE
NOTE:					·+/–/ENTER/MENUÒ
You can not select "CH SETUP" if you
set the channel to "L".	2 Then press ENTER.
					CH 002
		The auto tuning will start. The

channel display will count up and when finished, the screen returns to normal.

19