Instant Timer Recording (ITR)
The Instant Timer Recording feature provides a simple and convenient way to make a timed recording.
NOTE:
If you wish to watch the DVD playback during the ITR, press DVD to change to DVD mode and perform the DVD play- back (see page 37).
Preparation:
•Turn ON the TV and set it to the video input mode.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
Example: Instant Timer Recording for 30 minutes.
1 Load a cassette tape with the erase prevention tab intact.
The VCR will automatically turn on.
2 Press SP/EP to select the desired tape |
|
speed SP or EP. |
|
The tape counter and “SP” or “EP” will |
|
appear on the screen for about 4 |
|
seconds. | 00 : 00 : 00 SP |
3 Set19).the TV/CATV option to the appropriate position (see page
| TV | - VHF/UHF channels |
| CATV - CABLE TV channels | |
|
|
|
4 Press Number keys or VCR CH +/– to | CH 110 | |
select the channel to be recorded. |
| |
5 Press REC on the VCR or while holding REC, press PLAY on the Remote to begin recording. Press REC on the VCR again to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown in the chart below, up to a maximum of 6 hours. The ITR and recording time will appear on the screen for about 4 seconds. And, REC will keep blinkingITRCH0110:3in the display.
Press | Recording time | Press | Recording time | INDEX |
once | NORMAL REC | 6 times | 3:00 | |
twice | 0:30 | 7 times | 4:00 | |
3 times | 1:00 | 8 times | 5:00 | |
4 times | 1:30 | 9 times | 6:00 |
|
5 times | 2:00 | 10 times | NORMAL REC |
|
|
|
|
|
|
To cancel ITR
Press STOP or turn off the power.
"
" will appear on screen for about 4 seconds.
30