JVC HR-XVC15U manual Timer recording, Set the start time, end time, channel

Page 31

Timer recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

NOTES:

• If the clock symbol ( ) blinks when

the timer recording ended, the TV

program has not been completely

recorded because of an insufficient

tape supply. In this case, press TIMER

to cancel the timer program or press

EJECT to remove the cassette tape.

• During timer recording standby mode,

the VCR mode cannot be selected. To

use the VCR, press TIMER at first,

then press VCR to change to VCR

mode. After you use the VCR, press

TIMER again to put the VCR into timer

recording standby mode.

• If you press TIMER during timer

recording, the recording operation will

be interrupted. If you press TIMER

again within the programmed time, the

recording operation will start again.

• After a power failure or disconnection

of the power plug, all programmed

recording settings and time display

will be lost upon resumption of power.

In this case, reset the clock (see pages

21-23) and reprogram any timer re-

Preparation:

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode.

• Load a cassette tape with the erase prevention tab intact.

• Press OSD to verify time and date are correct (see page 29).

Example: Program a timer recording for the 26th day, channel 125

(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).

 

Press SET UP MENU. Select the

 

MENU

 

 

 

1 TIMER REC SET option, then press

 

AUTOTIMERREEATRECSET

ONOFF

 

 

 

 

 

 

 

 

 

AP

 

 

 

 

 

 

 

 

 

ENTER.

 

 

CHSETUP

 

 

 

 

 

 

SYSTEMSETUP

 

 

 

Press SET + or – to select one of the

DATE+/–/ENTER/MENUSTART

ÒENDCH

–

2 program line, then press ENTER.

–––––––:–––:–––––

 

 

 

·+/–/ENTER/CANCEL/MENUÒ

 

3 Press SET + or – to select the date,

26(SU)DATE

START

ENDCH

–

 

then press ENTER.

–––––––:–––:–––––

 

 

 

·+/–/ENTER/CANCEL/MENUÒ

 

4

Set the start time, end time, channel

DATE

START

ENDCH

 

 

 

 

 

 

26(SU)11:00PM

11:30PM125EP

 

and tape speed as in step 3.

–––––––:–––:––––––

 

NOTES:

·+/–/ENTER/CANCEL/MENUÒ

 

 

• If the start time is over the present time,

 

 

the entered program will be canceled af-

 

 

ter pressed ENTER.

 

 

 

 

 

 

• Press CANCEL to move cursor backward

 

 

 

 

 

 

for correction.

DATE

START

ENDCH

 

 

• To record from external source set the

 

 

channel to "L". "L" will appear next to CH

 

 

125 (or 69).

 

5

To enter other programs, repeat step

 

2 through 4.

26(SU)11:00PM

11:30PM125EP

 

• To return to the normal screen,

–––––––:–––:––––––

 

press SET UP MENU twice.

·+/–/ENTER/CANCEL/MENUÒ

 

6 Press TIMER. The clock symbol ( ) will appear on the display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off.

The timer recording will start at 5 seconds before the time you predetermined.

NOTES:

• If the clock symbol ( ) does not appear on the display in spite of the pressing of TIMER, the cassette may not have been loaded yet (see page 24).

• If the cassette is ejected in spite of the pressing of TIMER , the erase prevention tab of the cassette may have been removed

cordings.

(see page 24).

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DVD/CD Player Risk of Electric Shock Do not Open Location of the required MarkingPOWER-CORD Protection CleaningAccessories Power SourcesSafety Check Power LinesDamage Requiring Service Replacement PartsDisc Power sourceTo USE AC Power Source Laser BeamDVD Section FeaturesDVD/CD Player/Video Cassette Recorder VCR SectionContents Front Parts and functionsRear Track display for CD Explanation for On-Screen-Symbol DVDDisplay Display windowJVC TV Remote Control Remote controlChange the custom code for remote control Remote controlBattery precautions Remote control basicsCombination VHF/UHF Antenna with 75 ohm Coaxial Cable Basic connectionsSeparate VHF and UHF Antennas Supplied Basic connections75/300 ohm outputs Ohm Coaxial Cable not suppliedCatv Cable TV connections Incoming SwitchCable Descrambler Switch Catv Cable TV connectionsConnect to a TV with S-VideoOutput / Component Video Output Playback connectionsConnect to a TV with Audio/Video Output Connect to a BS TunerConnect to a Stereo Amplifier with Audio Output Playback connectionsConnect to an AV Amplifier with built-in digital surround Enter Setting the video channel/Setting the languageSetting the Video Channel Setting the languageTV/CATV Selection Tuner settingSetting channels automatically Presetting the channels into memoryTo ADD/DELETE channels To ADD/DELETE channels/Noise eliminationNoise elimination Zone, then press the Enter Daylight Saving Time setting Auto clock settingOFF To make corrections any time during the process Manual clock settingLoading and Unloading a cassette tape To rewind the tape or forward it rapidly Forward/Reverse picture search modeCassette tape playback To stop playbackSpecial playback DISPLAY-button Zero Return function/Video Index Search systemZero Return function Video Index Search systemRecording and viewing the same TV program Recording a TV programAppear on the display Recording a TV program Select the channel to be recorded Instant Timer Recording ITRTo cancel ITR Press Number keys or VCR CH +/- toSet the start time, end time, channel Timer recordingConfirmation / Cancellation of the timer recording Timer-recordingTimer recording special case Case timer programs-overlapOutput selection Stereo Recording and PlaybackConnection with Camcorder Duplicating a video tapeDuplicating a disc material onto a video tape Connection with second VCRDisc Setup language can be selected Preparation Setting setup languagePress OPEN/CLOSE Playback procedureFrame Advance Fast Forward PlaybackReview Playback Still PlaybackZooming Zooming/Locating desired sceneLocating desired scene Repeat playback Press Play Mode during playback or stop modeRepeat playback of Title, Chapter and Track You can arrange the order of tracks on the disc Program playback/Random playback CDProgram playback Random playbackMP3/WMA CD playback MP3/WMA/JPEG CD information MP3/WMA/JPEG playbackPress OPEN/CLOSE or Play Jpeg CD playbackAbout file menu Off Setting the Jpeg IntervalSetting the Jpeg Interval Or EnterPictures Only Setting the Select FilesAll Music OnlyZoom mode, press Zoom repeatedly to return to a 11 view Off Zooming/Changing angles Jpeg CDChanging angles This unit will allow you to zoom in on the Jpeg imageReturning to the scenes To cancel the markMarking desired scenes Marking the scenesCase of Video CD playback Changing soundtrack language/Karaoke playbackChanging soundtrack language Karaoke playbackDVD menu Subtitles/Changing angles/Title selection/DVD menuTurning the Subtitles On and Off Title selectionParental control Parental control settingTo unlock the Parental Control Setting CancelTemporary disabling of rating level by DVD disc English, Francais, Espanol Setting menu languagePress or Enter To select Then press Menu Press To select your Desired Language, then pressOther Setting subtitle languageAutomatic Press To select Desired Audio Language Then Press Enter Setting audio soundtrack languageThen Press Audio YourPanscan Setting the aspect ratio of TV screenYou can select the aspect ratio for your TV Preparation LetterboxVideo Audio Setting on screen display/Status display of discStatus display of disc DVDEnter to Dynamic Range ControlLanguage code list Symptoms Possible Solutions DVD/VCR Problems and troubleshootingVCR Symptoms Possible Solutions Problems and troubleshooting/Video head cleaningVideo head cleaning Auto Clock SettingVCR section SpecificationsAccessories GeneralWhat WE will do What YOU Must do for Warranty ServiceWhat is not Covered For customer useNew Maple Avenue Pine Brook, NJ For Servicing Only in U.S.AJ2C31501A U 02/12
Top Page Image Contents