EN 25
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps A to E in “Preparations” ( pg. 24), then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
A Set “AUTO CLOCK” to “ON”.
Press ENTER or e repeatedly to move the highlight bar to “AUTO CLOCK”, then press rt so that “ON” is selected.
B Select the host channel.
You can either select “AUTO” or enter a PBS channel number.
Press ENTER or e to move the highlight bar to “HOST CH”, then press rt repeatedly until “AUTO” or the desired PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
C Select the D.S.T. mode.
Press ENTER or e to move the highlight bar to “D.S.T.”, then press rt repeatedly until the desired setting is selected.
AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step D.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
D Select the time zone.
Press ENTER or e to move the highlight bar to “TIME ZONE”, then press rt repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:
{AUTO{ATLANTIC{EASTERN{CENTRAL{ MOUNTAIN{PACIFIC{ALASKA{HAWAII{ (back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step B, be sure to select the correct time zone manually.
E Complete the Semiauto Clock Set.
Press SET UP to return to normal screen.
IMPORTANT
Turn off the unit after performing Semiauto Clock. “AUTO” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit’s clock at the start and end of Daylight Saving Time. With Auto DST activated, —
—on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.
—on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.
Manual Clock Set
First follow steps A to E in “Preparations” ( pg. 24), then go to the following steps.
A Set time, date and year.
Press rt until the desired time appears, then press ENTER or e. Set the date and year in the same way.
● Holding rt changes the time in
B Select D.S.T. mode.
Press ENTER or e to move the highlight bar to “D.S.T.”, then press rt to select the desired setting.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
C Start clock.
Press SET UP and normal screen appears.
To make corrections any time during the process
Press ENTER or e repeatedly until the item you want to change blinks, then press rt.