30 EN | OPERATIONS ON VCR DECK (cont.) |
Skip Search
During playback, press SKIP SEARCH 1 to 6 times to skip over unwanted sections.
Each press initiates a
To resume normal playback during a Skip Search, press PLAY (4).
Index Search
Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Activate Index Search.
Press INDEX (2) or INDEX (6). “INDEX
●To access index codes 2 through 9, press INDEX (2) or INDEX (6) repeatedly until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press INDEX (2) twice.
To locate the beginning of D from the current position, press INDEX (6) once.
Current position
Index number
●When the specified index code is located, playback begins automatically.
Instant ReView
Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last
NOTE:
Before starting, make sure that the unit is off and that the Timer mode is disengaged.
Activate Instant ReView.
Press . The unit power comes on and the unit searches for the index code indicating the start of the last
●To watch the first of the 3 programs, press three times. The unit searches and begins playback automatically. You can access a program as far as 9 index codes away from the current tape position.