70 EN | EDITING (VCR DECK) (cont.) |
Dubbing
(from DVD to VCR)
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch to the right.
You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.
However, it is not possible to dub the
A Load a cassette and place a disc.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
APress OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
BPlace the disc in the disc tray.
CPress OPEN/CLOSE (x) on the DVD deck to close the disc tray.
B Prepare the VCR deck for dubbing.
APress VCR.
BPress SP/EP to select recording speed.
CSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8).
C Prepare the DVD deck for dubbing.
APress DVD.
BSearch for the point where you want to start dubbing by pressing PLAY (4), FF (5), REW (3), 6 or
2.
CPress PAUSE (9) to pause playback a little before the start point.
D Start dubbing.
Press and hold REC (7), then press PLAY (4) on the Remote.
●“dub” lights on the front display panel.
E End dubbing.
Press STOP (8).
●Be sure to press STOP (8) while the VCR indicator lights up on the unit.
NOTES:
●You can dub from DVD to VCR regardless of the scan mode setting. ( pg. 80) However, the progressive signals will be converted to the interlace signals when dubbing.
●Set “ON SCREEN GUIDE” to “OFF” ( pg. 80) if you do not want to record the
●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing is not recorded.
●Set “PICTURE CONTROL” to “EDIT”. ( pg. 75)