JVC HR-XVC26U Placing a Disc, Care and Handling of Discs, Open the disc tray, Place the disc

Page 9

EN 9

Placing a Disc

1Open the disc tray.

Press OPEN/CLOSE (x) on the DVD deck to open the disc tray.

x

●Pressing the button again closes the disc tray.

●Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure.

●Do not place unplayable discs or any object other than a disc in the disc tray.

●Do not press down strongly on the disc tray or place any heavy objects on it.

2Place the disc.

Place the disc in the disc tray with the label side facing up.

● Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged.

●To insert an 8 cm disc, place it according to the inner groove.

Care and Handling of Discs

How to handle discs When handling a disc, do not touch the surface of the

disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped,

the images and sound will not be picked up correctly,

and such a disc may cause the unit to malfunction.

Label side

Do not damage the label side, stick paper to or use any adhesive on its surface.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION

Sometimes during playback, noise or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.

Image 9

Contents For Customer Use HR-XVC26UDeclaration of Conformity Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsDo not block the unit’s ventilation openings or holes Do not place the unitTo mobile phone users On placing the unitFor Servicing Only in U.S.A Warranty Only in U.S.A Playable Discs About DiscsUnplayable Discs Region NumberFile Structure of Discs DVD Video MarksMarks related to video Audio CD/Video CDCare and Handling of Discs Placing a DiscOpen the disc tray Place the discFront View 10 ENRear View ON-SCREEN Display VCR deck 12 ENTo recall an indication Press on ScreenRemote How To Use14 EN Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsDVD deck only Set the VCR channel to offVCR indicator lights up 8To connect to a TV with component video input connectors16 EN Back of unitWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set Auto Clock Set/Auto Tuner SetMonitor Set 18 ENDVD deck Pan&Scan/Letter Box Default setting is bold in the table belowPan&Scan Letter Box20 EN LanguagePress w e to select Language On-screen Language Set DVD deckOn the DVD Set Up menu screen as an example Can set the default language as you likePress VCR/DVD repeatedly so that the DVD indicator 22 ENLanguage Code List Clock Set Access the Clock Set screen24 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen26 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels28 EN Basic PlaybackVariable Speed Search Slow MotionPause during playback Activate frame-by-frame playbackSkip Search 30 ENIndex Search Instant ReViewRepeat Playback Next Function MemoryActivate Repeat Playback Stop Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic trackingChoose a program Recording Resume FunctionSet the tape speed Start recordingInstant Timer Recording ITR 34 ENRecord One Program While Watching Another Tape Remaining Time Reset the counterSecond Audio Recording Set the counter display36 EN Access the Program screenEnter the program start time Enter the program stop timeTo Timer-Record Weekly Or Daily Serials Engage the unit’s timer modeEnter the channel position Cable Box or DBS Receiver UsersAccess the Program Check screen Disengage the timer modePress TIMER, then press Power Press PROG. CheckCancel or change a program To cancel or change a programReturn to the timer mode Press Timer40 EN Cancel or change program settingConfirm the overlapping programs Select the program to modifySatellite Auto Recording You can also connect the cable box if it has a timerLoad the disc 42 ENPause playback Start playbackAccess the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Stop modePress Skip 2 or Skip 6 during playback Locating the start point of the item or skip the itemZooming Resume FunctionMemorize the resume point Resume playback46 EN Access the selection menu3D Phonic Press 3D-PHONICduring playbackVFP function Adjusting the picture quality Appears when paused. appears when stopped Contents of the on-screen bar during playback48 EN Press on Screen twice whenever a disc is loadedChange the time information Access the on-screen barSelect the option Select menu itemSelect the repeat mode Access the repeat mode50 EN Select the start point To cancel A-B Repeat PlaybackSelect the end point Press rt repeatedly to select A-BTime Search 52 ENSelect the time If you have specified a wrong selectionChapter Search Select the chapterExamples 54 EN Access the menuSubtitle Selection Select the subtitle languageAngle Selection When using the Angle buttonSelect the view angle Press Angle56 EN When using the A.MONITOR buttonAudio Language Selection Select the audio languageSelect the audio channel Audio Channel SelectionFor Video CD For Svcd58 EN Parental LockTo temporarily release the Parental Lock To change the settings60 EN Country/Area Code List for Parental LockPage What is MP3? 62 ENMP3 control display MP3 Playback Using the MP3 control displaySelect the group Press rt to select the desired group, then press eGroup/track selection 64 ENTo return to the MP3 control display To start playback by specifying the group/track numberJpeg control display What is JPEG?Jpeg Playback Using the Jpeg control display66 EN Slide-show playback starts from the selected fileGroup/file selection To return to the Jpeg control displayPress Zoom during playback 68 EN Engage the Record Pause mode of the recording deck Set the input mode of recording deckAnother Video Recorder Start the source playerDubbing 70 ENFrom DVD to VCR Place a disc and load a MD Digital Audio DubbingPrepare the audio device for dubbing For the digital audio device72 EN Make connections Access the Function Set screen Mode Set74 EN VCR deckFor Example 76 EN When this function is set to onEach time you press the button, the setup menus For each mode setting, see pages 78 toLanguage Picture Audio Others Back to the beginning Press rt to move the hightlight to RESUME, then press EnterPicture Settings Audio Settings78 EN Connecting the unit’s analogue Audio Output connector Select this when you enjoy multichannel surround audio bySelect this when you enjoy conventional 2-channel stereo Audio by connecting the unit’s analogue Audio OutputOthers Settings Scan Mode SetChild Lock 80 ENOn the Remote On the unitPress DVD so that the DVD indicator DVD indicator lights up82 EN Lights upRecording cannot be started There is no cassette loaded, or MP3 Playback DVD deck84 EN Tray Lock To lock the disc trayTo unlock tray Playback 86 ENHorizontal resolution Signal-to-noise ratio 45 dBInput/Output RCA connectors X 1, OUT x Signal system88 EN Zooming 3D Phonic Plug&Play Set90 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A HR-XVC26U