JVC HR-XVC26U manual Group/file selection, To return to the Jpeg control display

EN 67

Group/file selection

To start slide-show playback by specifying the group/file number

APress the number keys (0-10, +10) to enter the group number.

BPress the number keys (0-10, +10) to enter the file

number.

●The slide-show playback starts from the file you have specified.

●To display only the selected file, then press ENTER. To start slide-show playback from that file, press ENTER again.

Example:
To select 3:	Press 3.
To select 14:	Press +10, then 4.
To select 20:	Press +10, then 10.
	Or press +10 twice, then 0.
To select 24:	Press +10, +10, then 4.
To select 110:	Press +10 ten times, then 10.
To select 150:	Press +10 fourteen times, then press 10 once.

NOTE:

Repeat Playback

You can repeat playback of the current group, file or all groups.

●While JPEG control display is on the TV:

A Select the mode.

Press REPEAT to select the desired repeat mode.

●Each time you press REPEAT, the mode changes as follows:

GROUP]ALL]OFF (No indication)](Back to the beginning)

GROUP:	All files of the current group are
	played back repeatedly.
ALL:	All files are played back
	repeatedly.
OFF (No indication):	Each file is played back once.

B Start playback.

Press PLAY (4).

●To stop Repeat Playback, press STOP (8).

●To cancel Repeat Playback, press REPEAT repeatedly until the repeat mode display disappears on the TV screen.

●You can also quit Repeat Playback in the following cases:

•Press OPEN/CLOSE (x) to open the disc tray.

•Turn off the unit.

To return to the JPEG control display

Press STOP (8).

Zooming

Press ZOOM during playback.

●When you want to zoom the picture during slide-show playback, first press PAUSE (9), then press ZOOM.

●Each press of ZOOM changes the magnification in the following steps:

ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] (Back to the beginning)

●To resume normal playback, press ENTER.

You cannot select 150 even if you press +10 fifteen times, then press 0 once.