JVC HR-XVC26U manual On the unit, On the Remote

Page 81

TROUBLESHOOTING

EN 81

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your unit off for repair.

POWER

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

No power is supplied to the unit.

The AC power cord is disconnected.

Connect the AC power cord.

 

 

 

 

2.

The Remote won’t function.

The batteries are discharged.

Replace the dead batteries with new ones.

 

 

 

TAPE TRANSPORT (VCR deck)

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

During recording, the tape does not

The unit is in the Record Pause mode.

Press PLAY (4) to resume recording.

 

run. The counter display blinks on the

 

 

 

front display panel.

 

 

 

 

 

 

2.

The tape will not rewind or fast-

The tape is already fully rewound or

Check the cassette.

 

forward.

fast-forwarded.

 

 

 

 

PLAYBACK (VCR deck)

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

The VCR deck can not be operated.

The VCR deck is not selected.

On the unit

 

 

 

Press VCR/DVD repeatedly so that the

 

 

 

VCR indicator lights up.

 

 

 

On the Remote

 

 

 

Press VCR so that the VCR indicator lights

 

 

 

up.

 

 

 

 

2.

The playback picture does not appear

If you are using the RF connection,

If you are using the RF connection,

 

while the tape is running.

— the TV receiver’s channel selector is

— set the TV receiver to the VCR channel.

 

 

not set to the VCR channel.

— perform “Set the VCR channel.”

 

 

— the unit’s VCR channel has not been

( pg. 14).

 

 

correctly set.

 

 

 

If you are using the AV, S-VIDEO* or

If you are using the AV or S-VIDEO*,

 

 

Component Video* connection, the TV

Component Video* connection, set the TV

 

 

receiver is not set to the AV mode.

to its AV mode.

 

 

* (DVD deck only)

* (DVD deck only)

 

 

 

 

3.

Noise appears during visual search.

This is normal.

 

 

 

 

 

4.

Noise appears during normal

The automatic tracking mode is

Try manual tracking. ( pg. 32)

 

playback.

engaged.

 

 

 

 

 

5.

The playback picture is blurred or

The video heads may be dirty.

Use a dry cleaning cassette ECL-3F, or

 

interrupted while TV broadcasts are

 

consult your JVC dealer.

 

clear or “USE CLEANING CASSETTE”

 

 

 

message appears on the screen.

 

 

 

 

 

 

6.

Breaks are noticeable in Hi-Fi

The automatic tracking mode is

Try manual tracking. ( pg. 32)

 

soundtrack.

engaged.

 

 

 

 

 

Image 81
Contents For Customer Use HR-XVC26UDeclaration of Conformity Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsDo not block the unit’s ventilation openings or holes Do not place the unitTo mobile phone users On placing the unitFor Servicing Only in U.S.A Warranty Only in U.S.A Playable Discs About DiscsUnplayable Discs Region NumberFile Structure of Discs DVD Video MarksMarks related to video Audio CD/Video CDCare and Handling of Discs Placing a DiscOpen the disc tray Place the discFront View 10 ENRear View ON-SCREEN Display VCR deck 12 ENTo recall an indication Press on ScreenRemote How To Use14 EN Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsDVD deck only Set the VCR channel to offVCR indicator lights up 8To connect to a TV with component video input connectors16 EN Back of unitWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set Auto Clock Set/Auto Tuner SetMonitor Set 18 ENDVD deck Pan&Scan/Letter Box Default setting is bold in the table belowPan&Scan Letter Box20 EN LanguagePress w e to select Language On-screen Language Set DVD deckOn the DVD Set Up menu screen as an example Can set the default language as you likePress VCR/DVD repeatedly so that the DVD indicator 22 ENLanguage Code List Clock Set Access the Clock Set screen24 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen26 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels28 EN Basic PlaybackVariable Speed Search Slow MotionPause during playback Activate frame-by-frame playbackSkip Search 30 ENIndex Search Instant ReViewRepeat Playback Next Function MemoryActivate Repeat Playback Stop Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic trackingChoose a program Recording Resume FunctionSet the tape speed Start recordingInstant Timer Recording ITR 34 ENRecord One Program While Watching Another Tape Remaining Time Reset the counterSecond Audio Recording Set the counter display36 EN Access the Program screenEnter the program start time Enter the program stop timeTo Timer-Record Weekly Or Daily Serials Engage the unit’s timer modeEnter the channel position Cable Box or DBS Receiver UsersAccess the Program Check screen Disengage the timer modePress TIMER, then press Power Press PROG. CheckCancel or change a program To cancel or change a programReturn to the timer mode Press Timer40 EN Cancel or change program settingConfirm the overlapping programs Select the program to modifySatellite Auto Recording You can also connect the cable box if it has a timerLoad the disc 42 ENPause playback Start playbackAccess the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Stop modePress Skip 2 or Skip 6 during playback Locating the start point of the item or skip the itemZooming Resume FunctionMemorize the resume point Resume playback46 EN Access the selection menu3D Phonic Press 3D-PHONICduring playbackVFP function Adjusting the picture quality Appears when paused. appears when stopped Contents of the on-screen bar during playback48 EN Press on Screen twice whenever a disc is loadedChange the time information Access the on-screen barSelect the option Select menu itemSelect the repeat mode Access the repeat mode50 EN Select the start point To cancel A-B Repeat PlaybackSelect the end point Press rt repeatedly to select A-BTime Search 52 ENSelect the time If you have specified a wrong selectionChapter Search Select the chapterExamples 54 EN Access the menuSubtitle Selection Select the subtitle languageAngle Selection When using the Angle buttonSelect the view angle Press Angle56 EN When using the A.MONITOR buttonAudio Language Selection Select the audio languageSelect the audio channel Audio Channel SelectionFor Video CD For Svcd58 EN Parental LockTo temporarily release the Parental Lock To change the settings60 EN Country/Area Code List for Parental LockPage What is MP3? 62 ENMP3 control display MP3 Playback Using the MP3 control displaySelect the group Press rt to select the desired group, then press eGroup/track selection 64 ENTo return to the MP3 control display To start playback by specifying the group/track numberJpeg control display What is JPEG?Jpeg Playback Using the Jpeg control display66 EN Slide-show playback starts from the selected fileGroup/file selection To return to the Jpeg control displayPress Zoom during playback 68 EN Engage the Record Pause mode of the recording deck Set the input mode of recording deckAnother Video Recorder Start the source playerDubbing 70 ENFrom DVD to VCR Place a disc and load a MD Digital Audio DubbingPrepare the audio device for dubbing For the digital audio device72 EN Make connections Access the Function Set screen Mode Set74 EN VCR deckFor Example 76 EN When this function is set to onEach time you press the button, the setup menus For each mode setting, see pages 78 toLanguage Picture Audio Others Back to the beginning Press rt to move the hightlight to RESUME, then press EnterPicture Settings Audio Settings78 EN Connecting the unit’s analogue Audio Output connector Select this when you enjoy multichannel surround audio bySelect this when you enjoy conventional 2-channel stereo Audio by connecting the unit’s analogue Audio OutputOthers Settings Scan Mode SetChild Lock 80 ENOn the Remote On the unitPress DVD so that the DVD indicator DVD indicator lights up82 EN Lights upRecording cannot be started There is no cassette loaded, or MP3 Playback DVD deck84 EN Tray Lock To lock the disc trayTo unlock tray Playback 86 ENHorizontal resolution Signal-to-noise ratio 45 dBInput/Output RCA connectors X 1, OUT x Signal system88 EN Zooming 3D Phonic Plug&Play Set90 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A HR-XVC26U