FUNAI DRV-B2737 Selecting the Sound mode, Reformatting a disc manually, Formatting is complete

DRV_B2737_B2734.book Page 25 Thursday, March 31, 2005 10:04 PM

Reformatting a disc manually

Video VR

DVD-RW DVD-RW

If you are using a DVD-RW disc, you can format the disc by performing “Format.” By default it will be in Video mode. You can change this to VR mode using the Setting menu.

Note

•When you reformat the disc, the contents of the disc are erased.

Insert a recordable disc.

1 In stop mode, press [SETUP].

“Easy Setting Menu” or “Advanced Setting Menu” will appear.

2 Select “Disc” using [Cursor U / D], then press [ENTER].

3 Select “Format” using

[Cursor U / D], then press [ENTER].

4 Select “Yes” using [Cursor U / D], then press [ENTER].

Format

Yes

No

Are you sure?

Yes

No

A Popup window will appear and prompt you to confirm.

If you want to cancel formatting, select “No.”

5 Select “Yes” using [Cursor U / D], then press [ENTER].

Formatting will start.

If you want to cancel formatting, select “No.”

6 Formatting is complete.

100% is indicated.

Note

•It is not possible to use a disc formatted with this unit in another DVD recorder. When you use a disc with another DVD recorder, format a disc using that DVD recorder.

Selecting the Sound mode

This unit can receive bilingual broadcasts.

You can switch between modes by pressing [AUDIO] on the remote control. Each mode is indicated on the TV screen as follows.

• During reception of bilingual broadcasts

Mode	Audio output	Display on
		the TV
		screen
Main	Main audio from both	Main
	speakers
Sub	Sub audio from both	Sub
	speakers
	• Main audio from the left
Main / Sub	speaker	Main / Sub
	• Sub audio from the right
	speaker

Setting External input audio

VideoVR

DVD-RW DVD-RW DVD-R

When the external input audio is a bilingual broadcast, or when copying a video tape to a DVD disc, you can choose “Stereo” or “Bilingual” to record on a DVD.

1 In stop mode, press [SETUP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

If it has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “External input Audio” using [Cursor U / D], then press [ENTER].

Recording		DVD
DVD-RW Recording Format	Video mode
Auto Chapter	10 minutes
Timer Programming
Auto Finalise
Bilingual Recording Audio	Main
External input Audio	Stereo
Dubbing Mode	VCR DVD

25 EN

Recording