FUNAI DRV-B2737, DRV-B2734 Priority of overlapped settings, If the starting time is same

DRV_B2737_B2734.book Page 31 Thursday, March 31, 2005 10:04 PM

•The timer recording cannot be performed in DVD and VCR at the same time. If you set two programmings with the same channel and time both in DVD and VCR, the programming that has priority will be recorded.

•You cannot make any DVD operation during DVD timer recording.

•You cannot make any VCR operation during VCR timer recording.

•If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc becomes full during recording, the unit will turn itself off. To continue recording, press [T-SET]to cancel the timer stand-by mode, insert a recordable disc and press [T-SET]again.

•If two or more programmes overlap, “Overlap” and the overlapped programme number will appear on the display.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you press [T-SET].

•If a videotape ends during timer recording, the unit will automatically stop, eject the videotape, and turn itself off. To continue recording, insert a recordable tape.

Priority of overlapped settings

The unit records programmes according to priority if timer programmes overlap.

If the starting time is same:

•The timer programming set first (PROG. 1) has priority.

PROG. 1				PROG. 2
				recording
PROG. 2				will start
				after
				PROG. 1
Actual				recording is
recording	PROG. 1		PROG. 2	completed.
Additional 30 seconds (at the most) are cut		off

If programming has been made at the end of the programming (PROG. 1) currently being recorded:

•The timer programming set first (PROG. 2) has priority. PROG. 3 will not be recorded.

PROG. 1			PROG. 2
			recording
PROG. 2			will start
PROG. 3			after
			PROG. 1
Actual			recording is
recording	PROG. 1	PROG. 2	completed.
Additional 30 seconds (at the most) are		cut off

If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is complete.

PROG. 1
PROG. 2
Actual	PROG. 2	PROG. 1
recording

Additional 30 seconds (at the most) are cut off

If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1
PROG. 2
Actual	PROG. 2
recording

Note for DVD recording

•If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent programme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

PROG. 1
PROG. 2
Actual	PROG. 1	PROG. 2
recording

The first 30 seconds

(at the most) are cut off.*

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the timer programming list.

31 EN

Recording