FUNAI DRV-B2737, DRV-B2734 Dubbing Mode, Select VCR→DVD using Cursor U / D, then press Enter

DRV_B2737_B2734.book Page 33 Thursday, March 31, 2005 10:04 PM

Dubbing Mode

Video	VR		VCR
DVD-RW	DVD-RW	DVD-R

You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be available only if the DVD disc or the tape is not copy protected. Before starting this function, prepare for the recording on the DVD-R / RW disc or the videotape. See pages 22 and 63.

Note for recording to a tape:

•The tape’s record tab is intact.

•The videotape is long enough to record the DVD disc.

Note for recording to a disc:

•The DVD disc is satisfied with the recording status. See pages 22 and 23.

Insert a disc and a tape with a record tab.

1 In stop mode, press [SETUP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

It has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “Dubbing Mode” using [Cursor U / D / L / P], then press [ENTER].

Option window will appear.

VCR to DVD

5 Select “VCR→DVD” using [Cursor U / D], then press [ENTER].

Dubbing Mode
		VCR	DVD
VCR	DVD
DVD	VCR

6 Press [SETUP] to exit the setting menu.

7 Press [DVD ].

Make sure to select a recording speed using [REC SPEED]. (See page 22.)

9 Press [PLAY P] on the unit, and then press [PAUSE p] at the point you wish to start recording.

10 Press [DUBBING].

VCR to DVD duplication will start.

11 Press [STOP S] to stop the recording.

Note For VCR to DVD duplication:

•After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to play back the tape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication.

•If the playback sound mode of VCR is set to “STEREO,” “LEFT” or “RIGHT,” the sound mode upon dubbing is automatically switched to “STEREO.” If the playback sound mode is set to “MONO,” the sound mode upon dubbing is also “MONO.”

•If you set “External input Audio” to “Stereo,” the sound is recorded in “Stereo” (both Video mode and VR mode).

•While in video mode, if you set “External input Audio” to “Bilingual,” the audio set in “Bilingual Recording Audio” mode is recorded.

While in VR mode, if you set “External input Audio” to “Bilingual,” bilingual audio is recorded.

•The main and sub audio will be simultaneously recorded (VR mode). You can select audio modes during playback.

DVD to VCR

5 Select “DVD→VCR” using [Cursor U / D], then press [ENTER].

Dubbing Mode
		VCR	DVD
VCR	DVD
DVD	VCR

6 Press [SETUP] to exit the setting menu.

7 Press [VCR ].

Make sure to select a recording speed using [REC SPEED]. (See page 63)

8 Press [DVD ].

9 Press [PLAY P] on the unit, and then press [PAUSE p] at the point you wish to start recording.

Recording

8 Press [VCR ].

33 EN