FIRST TIME INSTALLATION
Multisatellite/four port DiSEqC
Select this alternative if your antenna system has four LNBs and when you are not using any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” on page 13.
The selection of the different LNBs must be controlled by an external DiSEqC switch. Refer to page 15.
The procedure is the same as for mini DiSEqC and two port ☛ DiSEqC, but you have to configure four LNBs the same way as described on page 17.
Connection of a four port DiSEqC switch:
The following is an example of how you can connect 4 LNBs when you want to watch channels from ASTRA, HOTBIRD, SIRIUS and THOR.
Connect the LNBs to the switch the following way:
• the LNB intended for ASTRA to input 1
• HOTBIRD to input 2
• SIRIUS to input 3
• THOR to input 4
When the configuration of all four inputs are ready, press OK to proceed with the channel search.
Channel search
The Channel search procedure can be performed in different ways.
• If there are predefined channels, you can make an Automatic, Manual or Advanced search.
• If no predefined channel is available you can make a Manual or Advanced search only.
Automatic search
Check that there is a programme picture in the background from each channel.
Start an Automatic search by pressing OK.
GB 18