Nokia 9802 S owner manual System configuration, Channel search, Automatic search

Page 33

MAIN MENU

System configuration

You will be asked to enter your access code before you can en- ter this menu. The code is preset to 1234 from the factory. (The code can be changed from the Parental control menu. Re- fer to page 40.)

If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System con- figuration” menu.

Please note that many of these functions are the same as in the “First time installation.”

Channel search

The Channel search procedure can be performed in different ways.

•If there are predefined channels, you can make an Automatic, Manual or Advanced search.

•If no predefined channel is available you can make a Manual or Advanced search.

Automatic search

Start an Automatic search on a selected satellite by pressing OK.

GB 33

Image 33

Contents Mediamaster Page Mediamaster 9802 S ContentsGeneral Information about the Mediamaster For Your Safety+ P Remote ControlFront and Rear Panel Front panelRear panel Only for services coded with the Viaccess CA system Viaccess smartcardAbout the Smartcard and CA Module CA module with its smartcardPreparing the remote control Installation of the MediamasterConnecting the Mediamaster to the dish About the Scart socketsConnecting a TV and VCR Connecting to the TVGeneral If your TV has a Scart socket, but your VCR does notConnecting a HiFi system Connecting a satellite receiver and a VCRConnecting to the built in phone modem Nokia smart switchSwitching on for the first time with Scart connections Tuning procedure when RF connections are usedTuning your TV to the Mediamaster General information First Time InstallationWelcome menu LanguageRF modulator type Antenna/satellite selectionAlternatives 1-6 requires the use of a Universal LNBs About Signal strength AGC and Signal quality SNR Antenna adjustment and signal checkLine 1 through 4 on the antenna satel- lite selection menu Line 5 and 6 on the antenna satellite selection menu Connection of a DiSEqC switchLine 7 on the antenna satellite selection Menu One antenna/one LNB configurationMultisatellite/mini DiSEqC and two port DiSEqC Switch type and portDiSEqC switch with 4 inputs Advanced search Manual searchType of motor Motor antennaPress OK Adjust motorFirst Time Installation Time adjustment Finishing the first time installationChannel search progress Programme information Viewing ModeGuide I information buttonOptions green button List of TV and radio channelsAudio language Subtitle languageTV release Video recordingText button teletext TV and radio channels Main MenuEdit channels Important about editing channelsCreate list How to give a specific nameRename list Rearrange listsSelect channels Lock channelsRename channels Delete channels Rearrange channelsRemove channels To remove channelsUpdate channels via a PC Update channelsSystem configuration Channel searchAutomatic search Manual search Edit satellites To add a new satelliteFor a fixed antenna When your antenna is controlled by a motor View attributesDelete satellite TV settings Antenna/Satellite configurationModem configuration Position of the RGB outputInformation about the modem Reinstall Receiver upgradeUser preferences Language preferencesParental control Receiver lockAge rating control Receiver number Appearance preferencesSystem information DiagnosticsSystem information Release infoViaccess embedded Conditional AccessTimer GeneralImportant information related to the timer settings Timer settingsAGC Glossary of TermsProblem Possible causes What to do Problem SolvingFront Panel Display What to do if you can’t solve the problemSecurity information Technical SpecificationsPage 0232