Nokia 9802 S owner manual Edit satellites, To add a new satellite, For a fixed antenna

Page 35

MAIN MENU

Edit satellites

When a new satellite has been sent into orbit, or if you select a not preprogrammed satellite, you can add it to the existing sat- ellite list.

To add a new satellite

•Select the line “New satellite”.

•Press OK.

•Enter the name of the new satellite. (How to enter a name is described on page 29.)

•Enter the position (in degrees) with the numeric buttons on the remote control. (Use the left arrow button to erase digits.)

•Select orientation; East or West.

•Press OK to save these settings.

Before you can watch channels from that new satellite you must also carry out the following steps:

For a fixed antenna:

•Select “Antenna/Satellite configuration” in the “System con- figuration” menu.

•Follow the instructions on page 16 and 17. On the line Satel- lite, select the new satellite name.

•Adjust the antenna towards the new satellite. Watch the Sig- nal strength (AGC) and Signal quality (SNR) bar indications to check the levels. Please note: In this case, (a brand-new sat- ellite), you do not get a TV picture in the background on the screen, even when the SNR indication is good! When both indication bars (AGC and SNR) are good:

•Press the BACK button until you return to the ”System con- figuration” menu.

•Select ”Channel search”.

•Select “Manual” or “Advanced” search.

•Select the new satellite name.

•Enter the settings for Transponder frequency, Polarization etc. for the new satellite.

•Press OK to start the channel search procedure in order to download channels from the new satellite.

•When you get the message on the screen that ”you have found X new TV-channels and X new radio channels”, press OK to save the new channels.

If any new channels are found, they will be saved in the channel list they belong to.

At the same time as you save the new channels, also the settings for the new satellite will be saved.

GB 35

Image 35

Contents Mediamaster Page Mediamaster 9802 S ContentsGeneral Information about the Mediamaster For Your Safety+ P Remote ControlRear panel Front and Rear PanelFront panel CA module with its smartcard Viaccess smartcardOnly for services coded with the Viaccess CA system About the Smartcard and CA ModuleAbout the Scart sockets Installation of the MediamasterPreparing the remote control Connecting the Mediamaster to the dishIf your TV has a Scart socket, but your VCR does not Connecting to the TVConnecting a TV and VCR GeneralNokia smart switch Connecting a satellite receiver and a VCRConnecting a HiFi system Connecting to the built in phone modemTuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used Language First Time InstallationGeneral information Welcome menuAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Line 1 through 4 on the antenna satel- lite selection menu About Signal strength AGC and Signal quality SNRAntenna adjustment and signal check Line 5 and 6 on the antenna satellite selection menu Connection of a DiSEqC switchLine 7 on the antenna satellite selection Menu One antenna/one LNB configurationMultisatellite/mini DiSEqC and two port DiSEqC Switch type and portDiSEqC switch with 4 inputs Advanced search Manual searchType of motor Motor antennaPress OK Adjust motorFirst Time Installation Channel search progress Time adjustmentFinishing the first time installation Programme information Viewing ModeGuide I information buttonSubtitle language List of TV and radio channelsOptions green button Audio languageText button teletext TV releaseVideo recording Important about editing channels Main MenuTV and radio channels Edit channelsRearrange lists How to give a specific nameCreate list Rename listRename channels Select channelsLock channels To remove channels Rearrange channelsDelete channels Remove channelsUpdate channels via a PC Update channelsAutomatic search System configurationChannel search Manual search For a fixed antenna Edit satellitesTo add a new satellite Delete satellite When your antenna is controlled by a motorView attributes TV settings Antenna/Satellite configurationInformation about the modem Modem configurationPosition of the RGB output Language preferences Receiver upgradeReinstall User preferencesAge rating control Parental controlReceiver lock Receiver number Appearance preferencesRelease info DiagnosticsSystem information System informationGeneral Conditional AccessViaccess embedded TimerImportant information related to the timer settings Timer settingsAGC Glossary of TermsProblem Possible causes What to do Problem SolvingFront Panel Display What to do if you can’t solve the problemSecurity information Technical SpecificationsPage 0232