FIRST TIME INSTALLATION
The position of 22 satellites are preprogrammed in the SatScan motor.
As long as you select satellite positions from the line “Automatic search” you also have access to preprogrammed TV channels that makes it easy to check the signal quality.
•From line 1 Automatic search, select the satellite from which you want to search for channels.
Then the procedure is the same as for the first satellite installa- tion.
However, you must give the antenna motor some time to turn itself to the new position!
Channel search progress
This menu will be shown as long as the Mediamaster is search- ing for channels to download
All channels found will be listed in two columns on the screen; with TV channels in one column and radio channels in the other.
Please note that the search procedure may take a few minutes.
When the search procedure has ended, a message will tell how many TV and radio channels have been found.
Press OK to continue.
Time adjustment
The time is adjusted by using the | buttons, ± 1/2 an hour at | |
a time. |
|
|
You can also adjust the minutes by using the | buttons. | |
Press OK to finish the first time installation, see below.
Finishing the first time installation
The channels found at the search procedure will now be saved. A message telling that the installation procedure is completed will be shown on the screen.
Press OK in order to start watching channels from the box.
GB 23