Nokia 9802 S owner manual Motor antenna, Type of motor

Page 20

FIRST TIME INSTALLATION

Motor antenna

In case you have an antenna motor to control your satellite an- tenna you have to make the following settings. If the antenna is prevented from reaching its predefined east/west limit positions, you have to set new limits. See page 37 for instructions.

•From the “Antenna/Satellite selection” menu select line 7 (re- fer to page 13) and press OK.

• Select line 5, “Motor antenna configuration” and press OK.

Type of motor

•Select SATSCAN if it is a Nokia SatScan motor.

•Select DiSEqC in case the motor you use is controlled by DiSEqC commands.

LNB type

•Select Universal, one of the fixed frequencies or enter the LNB frequency with the numeric buttons on the remote control.

LNB offset voltage

If the cable down from the antenna is very long, the voltage at the LNB could be too low to change the polarization. You can in- crease the voltage to the LNB by 0,5 Volt.

Satellite

Select Astra if you have a SatScan motor and Hotbird if you have a DiSEqC motor.

GB 20

Image 20

Contents Mediamaster Page Contents Mediamaster 9802 SFor Your Safety General Information about the MediamasterRemote Control + PRear panel Front and Rear PanelFront panel Viaccess smartcard Only for services coded with the Viaccess CA systemAbout the Smartcard and CA Module CA module with its smartcardInstallation of the Mediamaster Preparing the remote controlConnecting the Mediamaster to the dish About the Scart socketsConnecting to the TV Connecting a TV and VCRGeneral If your TV has a Scart socket, but your VCR does notConnecting a satellite receiver and a VCR Connecting a HiFi systemConnecting to the built in phone modem Nokia smart switchTuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used First Time Installation General informationWelcome menu LanguageAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Line 1 through 4 on the antenna satel- lite selection menu About Signal strength AGC and Signal quality SNRAntenna adjustment and signal check Connection of a DiSEqC switch Line 5 and 6 on the antenna satellite selection menuOne antenna/one LNB configuration Line 7 on the antenna satellite selection MenuSwitch type and port Multisatellite/mini DiSEqC and two port DiSEqCDiSEqC switch with 4 inputs Manual search Advanced searchMotor antenna Type of motorAdjust motor Press OKFirst Time Installation Channel search progress Time adjustmentFinishing the first time installation Viewing Mode Programme informationI information button GuideList of TV and radio channels Options green buttonAudio language Subtitle languageText button teletext TV releaseVideo recording Main Menu TV and radio channelsEdit channels Important about editing channelsHow to give a specific name Create listRename list Rearrange listsRename channels Select channelsLock channels Rearrange channels Delete channelsRemove channels To remove channelsUpdate channels Update channels via a PCAutomatic search System configurationChannel search Manual search For a fixed antenna Edit satellitesTo add a new satellite Delete satellite When your antenna is controlled by a motorView attributes Antenna/Satellite configuration TV settingsInformation about the modem Modem configurationPosition of the RGB output Receiver upgrade ReinstallUser preferences Language preferencesAge rating control Parental controlReceiver lock Appearance preferences Receiver numberDiagnostics System informationSystem information Release infoConditional Access Viaccess embeddedTimer GeneralTimer settings Important information related to the timer settingsGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security informationPage 0232